Raising wheel pants

Use this area for aviation related general discussions, newsworthy items, and non model specific topics.

Raising wheel pants

Postby kmwoody » Sun Jul 06, 2014 1:07 pm

There has been much discussion about tire size for the Sonex when flying off of turf. When I replaced my tires I decided to stick with the stock size because I do not land on turf much. I had never had problems but it seemed like the pants showed evidence of dragging slightly. This spring I landed on our grass (cross) runway and cracked my pants. Obviously the ground was still soft.
My question, has anyone raised their pants instead of opting for the bigger tires? It seems that a 1/2" to 1" would help immensely.

Ken W
Sonex 959
235 hrs
kmwoody
 
Posts: 107
Joined: Mon Mar 24, 2014 8:14 pm

Re: Raising wheel pants

Postby andrewp » Sun Jul 06, 2014 3:42 pm

Yes, and yes.

Raised them until I could just see the rims. Occasionally land on grass, so far so good.

Image

Sorry for the crappy picture, but it was the best I had handy that I could crop (me pushing her out of the hangar)

AP
#618
andrewp
 
Posts: 213
Joined: Mon Oct 14, 2013 11:10 pm

Re: Raising wheel pants

Postby kmwoody » Sun Jul 06, 2014 8:35 pm

Thanks Andrew, I will raise mine then!

Ken W
kmwoody
 
Posts: 107
Joined: Mon Mar 24, 2014 8:14 pm

Re: Raising wheel pants

Postby andrewp » Sun Jul 06, 2014 10:05 pm

I should also mention that just before I repainted them, I fiberglassed some aluminum strips to stop grass and stuff accumulating in the back of the pants. Someone wiser than me had warned me about this (Gus Schlegel?) to save your wheel pants from getting filled up with stuff. In his case I think he broke one when they filled with mud.
andrewp
 
Posts: 213
Joined: Mon Oct 14, 2013 11:10 pm

Re: Raising wheel pants

Postby kmwoody » Mon Jul 07, 2014 11:33 pm

Thanks again Andrew, great information. I know mine have had grass accumulating in them. Mud would add extra unwanted weight also.

Ken W
kmwoody
 
Posts: 107
Joined: Mon Mar 24, 2014 8:14 pm


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 77 guests