YouTube Videos

Use this area for aviation related general discussions, newsworthy items, and non model specific topics.

YouTube Videos

Postby mike.smith » Sat Dec 17, 2022 10:03 pm

I got a new GoPro 11, and I hadn't used my wing-mount camera in quite a while so I put up a video on YouTube.

https://www.youtube.com/watch?v=0wTyop6zxF8
Mike Smith
Sonex N439M
Scratch built, AeroVee, Dual stick, Tail dragger
http://www.mykitlog.com/mikesmith
mike.smith
 
Posts: 1433
Joined: Tue Jan 29, 2013 8:45 pm

Re: YouTube Videos

Postby Bryan Cotton » Sun Dec 18, 2022 12:37 am

Mike,
How do you judge when to kick it over for the hammerhead in the Sonex? It was the first maneuver I learned (in an Enstrom) and I did a lot in the Pitts. In the Pitts we used to wag the ailerons just a bit and when they got ineffective we would kick in rudder. I'd be concerned about a tailslide in the Waiex.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5501
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: YouTube Videos

Postby mike.smith » Sun Dec 18, 2022 7:19 pm

It's mostly by feel, but I'm around 50 kts when I begin to think about moving the control surfaces. So with lag time I'm probably in the 40's. Don't want a tail slide, right?! By the time the airframe is turning over I expect I'm in the 30's and 20's. With the engine at full power the rudder is doing all the work, so as long as you don't tail slide, the rudder will do its job.
Mike Smith
Sonex N439M
Scratch built, AeroVee, Dual stick, Tail dragger
http://www.mykitlog.com/mikesmith
mike.smith
 
Posts: 1433
Joined: Tue Jan 29, 2013 8:45 pm


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 20 guests