Sonex flaps

Use this area for aviation related general discussions, newsworthy items, and non model specific topics.

Sonex flaps

Postby Rick524 » Mon Jan 22, 2018 2:12 pm

Has anyone measured their actual flap angles at 1, 2, and 3 notches?
I'd like label each notch in degrees.

Thanks!

Rick
Sonex 524
Rick524
 
Posts: 159
Joined: Fri Jun 03, 2011 11:40 am

Re: Sonex flaps

Postby kmacht » Mon Jan 22, 2018 4:36 pm

I haven't measured them but have you thought about why you want to mark them in degrees? Does it matter if notch 1 is 15 degrees, 17, or 12? It's not like an electric flap system where you can infinatly adjust them. I just marked my notches as 1 2 and 3. When flying you only need to know what notch you are in. It doesn't matter what degree that equates to.

Keith
#554
kmacht
 
Posts: 772
Joined: Tue Jun 21, 2011 11:30 am

Re: Sonex flaps

Postby N111YX » Mon Jan 22, 2018 5:59 pm

I think mine came out to 8, 18, and 28 degrees per a digital protractor. That's what I labeled them.

It's personal preference on what to call them...:)
Last edited by N111YX on Mon Jan 22, 2018 6:22 pm, edited 1 time in total.
Kip

2010 Waiex 0082 (first flight May 2010)
Jabiru 3300 #1637 and #3035
Dynon D-180
Becker radios
Garmin GDL 82 ADS-B
1175 hours
48 states visited
Based near Atlanta

Also flying a...
2000 Kolb Firestar II, Rotax 503, 575 hours
N111YX
 
Posts: 711
Joined: Fri Jun 03, 2011 9:43 am
Location: Atlanta, GA USA

Re: Sonex flaps

Postby mike.smith » Mon Jan 22, 2018 6:11 pm

I just labeled mine 10, 20 and 30, regardless of what they really are. But those numbers are close to what Kip measured.
Mike Smith
Sonex N439M
Scratch built, AeroVee, Dual stick, Tail dragger
http://www.mykitlog.com/mikesmith
mike.smith
 
Posts: 1430
Joined: Tue Jan 29, 2013 8:45 pm


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 19 guests