Any one using heated seats with an Aerovee?

Use this area for aviation related general discussions, newsworthy items, and non model specific topics.

Any one using heated seats with an Aerovee?

Postby Fastcapy » Sun Dec 07, 2014 1:33 pm

-----
Last edited by Fastcapy on Tue Feb 24, 2015 2:55 pm, edited 1 time in total.
Mike Beck
Oshkosh, WI (KOSH)
Sonex #1145 N920MB
Std Gear, Modified Aerovee, Rotec TBI, Dual Stick, Acro Ailerons
MGL Panel
Airworthiness: 10/24/13, First Flight: 05/18/14
Fastcapy
 
Posts: 335
Joined: Sun Jan 12, 2014 11:45 am
Location: KOSH

Re: Any one using heated seats with an Aerovee?

Postby MichaelFarley56 » Sun Dec 07, 2014 1:56 pm

My biggest fear would be the amperage draw of the seats. Any idea what the power draw is? Most alternators recommend a max continuous draw of 80% which for us means you only want to pull 16 amps out of the AeroVee.

If the airplane is using at least a few amps to run systems, that doesn't leave a whole lot of power to run seat heaters.

Just as a thought...have you looked into battery powered heated seats, gloves, socks, etc? I'm sure the cost will go up, but that may be an easy answer to give you some needed heat without running into power draw problems.

Either way, let us know how things go! I'm sure a lot of people will be interested in your solution.
Mike Farley
Waiex #0056 - N569KM (sold)
Onex #245
MichaelFarley56
 
Posts: 1485
Joined: Thu Jun 02, 2011 11:38 pm
Location: Columbus, Ohio

Re: Any one using heated seats with an Aerovee?

Postby marsolgp » Sun Dec 07, 2014 2:11 pm

The AeroVee alternator is your limiting factor….. I had heat muff last year, was O.K. removed it this year and went with battery heated jacket (7.4volt) and heated socks (3 AAA batteries each) Much better than muff and the batteries last several hours.
G. Marsolais
Waiex w/Turbo Aerovee
Rotec TBI, Sensenich Climb Prop
MGL Xtreme EFIS & EMS
A/P, iFly720 w/ADS-B
marsolgp
 
Posts: 119
Joined: Thu Feb 14, 2013 8:29 pm
Location: Kansas

Re: Any one using heated seats with an Aerovee?

Postby billmaxmcw » Sun Dec 07, 2014 4:00 pm

Motorcyclists use several types of heated clothing regularly; check out cycle supply stores.
Bill
Bill, Oregon
2012 Sonex taildragger (kit)
Aerovee 2.1, Aeroinjector
billmaxmcw
 
Posts: 44
Joined: Mon Apr 14, 2014 6:06 pm

Re: Any one using heated seats with an Aerovee?

Postby GWMotley » Sun Dec 07, 2014 8:35 pm

I have been using Gerbing heated clothing plugged in to a 12 volt supply with good success.
Gary Motley
Sonex 1155
Great Plains Force One/Aerovee Hybridized
MGL/ipad panel
First Flight 08/2011
About 670 hours on this plane
GWMotley
 
Posts: 83
Joined: Sun May 13, 2012 1:08 pm

Re: Any one using heated seats with an Aerovee?

Postby fastj22 » Sun Dec 07, 2014 8:55 pm

Jeff Schultz told me he installed them in his Sonex. Says they draw 5A. Slide in between the fabric and the foam.

John Gillis
SEL Private, Comm Glider, Tow pilot (Pawnee Driver)
Waiex N116YX, Jabiru 3300, Tail dragger,
First flight, 3/16/2013. 403 hours and climbing.
Home: CO15. KOSH x 5
Flying a B-Model Conversion (Super Bee Baby!)
User avatar
fastj22
 
Posts: 1594
Joined: Sun Aug 21, 2011 5:56 pm
Location: Mile High

Re: Any one using heated seats with an Aerovee?

Postby vigilant104 » Sun Dec 07, 2014 9:20 pm

Ahh, I think I saw that offer too, in a Menards advertisement.
I'm tempted, but a bit concerned about electric resistance heating placed under my very-dear-to-me deriere inside an airplane. There's not much scarier to contemplate than a fire in an airplane, but having a short-circuit under my tush while trying to fly might be a close second. The parts that get coldest are my hands and face, so I'm not sure how useful the heated seat would be at any rate.

But I've thought about it.
Mark Waldron
Sonex 1230 (Builder: Jay Gibbs)
Aerovee, Trigear
vigilant104
 
Posts: 265
Joined: Wed Nov 09, 2011 3:34 pm
Location: Near Dayton, OH


Return to General Discussion

Who is online

Users browsing this forum: LLR and 82 guests