Vic from Houston
Posted: Thu Apr 03, 2014 12:38 pmMy name is Victor "Vic" Delgado from Houston Texas. I have been interested in aviation since I was young and have never had any aviation enthusiasts in my family to support me, though that did not stop my facination for aviation to grow through out my life time. I am finally at a point in my life where I have decided to start living my dream of building and flying my own aircraft. I can truly say that the creation of the Sport Pilot category jump started me into making a move towards building my own aircraft. The cost of obtaining a pilots license was always what kept me from pursuing my aviation dream. The reduction in requirements and cost of that help push me over the edge and put me into gear.
I researched the aircraft possibilities for over a year and monitored the Sonex builder forums absorbing everything I could about the plane. I started building my Scratchbuilt Sonex #969 in 2006, a few months before I even acquired a set of plans. I started early by designing and fabricating a set of LED Nav/Postion lights that were going to be used on my Sonex when it was built. Those lights are no longer a part of my project, but still hang on my workshop wall, as a reminder now of my ambition to get started building my plane somehow. My decisions regarding my project have changed several times over the years during my build from engine choice, to how many sticks, to canopy type and configuration, etc... and still take place quite regularly. I still am very happy with my decision to build a Sonex though, and that has not changed.
I am a definitely considered a slow builder, mainly because I have chosen to finance my project on my meager budget as I have progressed, but also because my occupation sometimes takes me away from home for months at a time, while my project sits idle waiting for my return. In addtion, I like to scratchbuild some items that most people never even consider doing such as my fiberglass tips, some instruments, position nav lighting, and even researching, testing and fabricating my own taxi landing lights. Sometimes it may have been cheaper just to buy an item, but the knowlege I gain and the pride I get from just knowing I made it myself is substantial every time I see and use it. I really enjoy utililizing the knowledge and experience I have gained during my lifetime and use it in my aircraft project, plus learning new skills like welding, and sheet metal work to fabricate the parts myself.
I can't tell you when my project will be airborne, but I can tell you that my dream has been a reality since that spark was reignited several years ago and has been materializing more and more with each hour I spend on my project.
No less important, are the many great aviation friends I have made and their assistance along this continuing journey of my path to the sky.
My first and only ride in a Sonex was in Robert Barber's Scratchbuilt "Sexy Hexy".
I researched the aircraft possibilities for over a year and monitored the Sonex builder forums absorbing everything I could about the plane. I started building my Scratchbuilt Sonex #969 in 2006, a few months before I even acquired a set of plans. I started early by designing and fabricating a set of LED Nav/Postion lights that were going to be used on my Sonex when it was built. Those lights are no longer a part of my project, but still hang on my workshop wall, as a reminder now of my ambition to get started building my plane somehow. My decisions regarding my project have changed several times over the years during my build from engine choice, to how many sticks, to canopy type and configuration, etc... and still take place quite regularly. I still am very happy with my decision to build a Sonex though, and that has not changed.
I am a definitely considered a slow builder, mainly because I have chosen to finance my project on my meager budget as I have progressed, but also because my occupation sometimes takes me away from home for months at a time, while my project sits idle waiting for my return. In addtion, I like to scratchbuild some items that most people never even consider doing such as my fiberglass tips, some instruments, position nav lighting, and even researching, testing and fabricating my own taxi landing lights. Sometimes it may have been cheaper just to buy an item, but the knowlege I gain and the pride I get from just knowing I made it myself is substantial every time I see and use it. I really enjoy utililizing the knowledge and experience I have gained during my lifetime and use it in my aircraft project, plus learning new skills like welding, and sheet metal work to fabricate the parts myself.
I can't tell you when my project will be airborne, but I can tell you that my dream has been a reality since that spark was reignited several years ago and has been materializing more and more with each hour I spend on my project.
No less important, are the many great aviation friends I have made and their assistance along this continuing journey of my path to the sky.
My first and only ride in a Sonex was in Robert Barber's Scratchbuilt "Sexy Hexy".