Mounting the Y tails

Discussion for builders, pilots, owners, and those interested in building or owning a Waiex.

Mounting the Y tails

Postby Bryan Cotton » Wed Jul 09, 2014 8:08 pm

Waiex builders,
Tried to mount my tail for the first time. I could not get the hockey sticks past the turtledeck skin. Looks like I need to trim another 1/4". Does this sound right?
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5489
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Mounting the Y tails

Postby fastj22 » Wed Jul 09, 2014 9:28 pm

Its been a few years, but remember having to trim quite a bit.

John Gillis
SEL Private, Comm Glider, Tow pilot (Pawnee Driver)
Waiex N116YX, Jabiru 3300, Tail dragger,
First flight, 3/16/2013. 403 hours and climbing.
Home: CO15. KOSH x 5
Flying a B-Model Conversion (Super Bee Baby!)
User avatar
fastj22
 
Posts: 1594
Joined: Sun Aug 21, 2011 5:56 pm
Location: Mile High

Re: Mounting the Y tails

Postby Bryan Cotton » Wed Jul 09, 2014 9:51 pm

Thanks John. I will take out the dremel and show no mercy!
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5489
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Mounting the Y tails

Postby MichaelFarley56 » Wed Jul 09, 2014 10:55 pm

I think I had to trim a little extra as well Bryan. If you're talking 1/4" or so, I wouldn't be losing any sleep over it! File it away and move on!
Mike Farley
Waiex #0056 - N569KM (sold)
Onex #245
MichaelFarley56
 
Posts: 1485
Joined: Thu Jun 02, 2011 11:38 pm
Location: Columbus, Ohio

Re: Mounting the Y tails

Postby Bryan Cotton » Wed Jul 09, 2014 11:38 pm

Mike,
I did take 1/4". Once in place they would fit without trimming - like it was designed to have the tail mounted before the turtledeck.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5489
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77


Return to Waiex

Who is online

Users browsing this forum: No registered users and 21 guests