random user submitted photo
Ruddervator questions
2 posts
• Page 1 of 1
Ruddervator questions
by Bryan Cotton » Fri Nov 08, 2013 11:06 pm
Hi all,
A couple of ruddervator questions. The skins are trimmed at a 20 degree angle, but then the tip rib leans in a bit. It seems like I should mark the 20 degrees on the bottom, then mark over the little bit of lean in the front, then connect the lines across the top. Does this sound right?
Also I did not see a bend radius callout on the drive horns. I am thinking to use 1/8" times 4, or a half inch radius. That would be a 1" pipe, same as the hockey stick. What did you do?
Thanks!
A couple of ruddervator questions. The skins are trimmed at a 20 degree angle, but then the tip rib leans in a bit. It seems like I should mark the 20 degrees on the bottom, then mark over the little bit of lean in the front, then connect the lines across the top. Does this sound right?
Also I did not see a bend radius callout on the drive horns. I am thinking to use 1/8" times 4, or a half inch radius. That would be a 1" pipe, same as the hockey stick. What did you do?
Thanks!
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
-
Bryan Cotton - Posts: 5489
- Joined: Mon Jul 01, 2013 9:54 pm
- Location: C77
Re: Ruddervator questions
by N111YX » Sat Nov 09, 2013 8:25 pm
I'd be happy to help, Bryan but I'm not sure what you mean regarding the first paragraph. I'll get my plans out tomorrow. We're going back about five years for me here.
I don't recall the horn radius but it can be large as it does not have to fit with anything...
I don't recall the horn radius but it can be large as it does not have to fit with anything...
Kip
2010 Waiex 0082 (first flight May 2010)
Jabiru 3300 #1637 and #3035
Dynon D-180
Becker radios
Garmin GDL 82 ADS-B
1175 hours
48 states visited
Based near Atlanta
Also flying a...
2000 Kolb Firestar II, Rotax 503, 575 hours
2010 Waiex 0082 (first flight May 2010)
Jabiru 3300 #1637 and #3035
Dynon D-180
Becker radios
Garmin GDL 82 ADS-B
1175 hours
48 states visited
Based near Atlanta
Also flying a...
2000 Kolb Firestar II, Rotax 503, 575 hours
- N111YX
- Posts: 711
- Joined: Fri Jun 03, 2011 9:43 am
- Location: Atlanta, GA USA
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 21 guests
