Roth Waiex #197

[Bryan Cotton]

I think what Ryan's plane is suffering from is a loose rivet mandrel. Try putting a piece of tape over one rivet at a time, till you find the culprit.

Ok, that was awesome! Ryan let us know how it goes.

[Rynoth]

We had family in town this weekend and went to the airport for a quick airplane demo.

[XenosN42]

Nice!

[Darick]

Whistling sound...just like a P-51 blade tips at supersonic speed!!!

[Rynoth]

I used a new camera and made a new video.

[Matt541]

Excellent Ryan! It's crazy how much capability these 360 cameras have, and honestly not for a lot of money.

What kind of mount are you using for your wing and how is it attached? I know some people just use the adhesive mounts on the bare surface, but I'm a bit apprehensive of doing so.

[Rynoth]

What kind of mount are you using for your wing and how is it attached? I know some people just use the adhesive mounts on the bare surface, but I'm a bit apprehensive of doing so.

I just used the standard flat gopro adhesive mounting block. I cleaned the aluminum with acetone, warmed it a bit with a heat gun and stuck it on. I was flying less than an hour later, no issues with adhesion. The Gopro Max 360 I'm using is sort of a flat square, so I mounted it sideways (thinner edge into the wind).