Sonex B Tail Page SNB-T02

Discussion for builders, pilots, owners, and those interested in building or owning a second generation Sonex or Waiex.

Sonex B Tail Page SNB-T02

Postby pfhoeycfi » Mon Apr 16, 2018 12:25 pm

Hi,
Detail Section BB indicates CCP42 rivets through the skin and rib (mid and outboard) while Section EE indicates CCP41s through the skin and root rib.

Can anybody confirm that this is correct, or not? I ask because the grip in BB and EE appears to be the same. It doesn't make sense (at this point) that different rivets are called out in the 2 details.

I was going to rivet this up right now but I'll hold off, I do not want to mess this up...plus I only have so many of each rivet...

Please advise,

thanks,

Peter
B-21
pfhoeycfi
 
Posts: 58
Joined: Wed Jun 28, 2017 3:45 pm

Sonex B Tail Page SNB-T02

Postby n307tw » Mon Apr 16, 2018 1:45 pm

Hi Peter,

I have sent Kerry emails about this too when I was working on the tail. They didn’t send me enough CCP-41s and I was told you can use 42s where 41s are called out but not the reverse. I hope this helps!

-Tim


Sent from my iPhone using Tapatalk
Tim Wrede
Sonex-B #18 Tri-Gear
N307TW (reserved)
Aerovee Turbo and MGL based panel likely
http://www.n307tw.com
User avatar
n307tw
 
Posts: 28
Joined: Mon May 29, 2017 9:03 pm
Location: Long Island, NY

Re: Sonex B Tail Page SNB-T02

Postby Marrahm » Thu Apr 19, 2018 1:55 pm

Same advice for me and worked fine. I received no 41s actually. Only places I had trouble was later on with some loose 42s on rib gussets. Consider Buying some 41s to have handy.

Mike
Marrahm
 
Posts: 15
Joined: Thu Apr 14, 2016 10:18 pm


Return to Sonex-B / Waiex-B

Who is online

Users browsing this forum: No registered users and 1 guest