Scott's Sonex 1629 - N629SX

Use this area to create a thread with photos from your build.

Re: Scott's Sonex #1629 - Progress

Postby Bryan Cotton » Fri Jun 27, 2014 10:33 pm

Looks cool Scott! I feel sorry for you being stuck in the Med. You are going to miss all the mosquitos! I, on the other hand, will likely see them all.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5496
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Scott's Sonex #1629 - Progress

Postby ScottM-Sonex1629 » Sat Jun 28, 2014 7:51 am

Bryan, the travel to Europe is always a killer going west to east. Left Columbus yesterday mid-day and had one delay after another. Made every connection a mad dash...then to be followed up by ramp holds.

Did you know that Duesseldorf, Germany,has noise abatement restrictions and no flight can land before 6AM local time. So after scrambling to make or connection in Newark due to the delayed flight from Columbus, they pushed us back from the gate and we sat on the ramp with the APU running for almost an hour so we would not land too early. Then we had another connecting flight to Barcelona, Spain! At 6:00 AM local time (Saturday) here in Europe.

This is what my 11 year old son Liam looks like after about 14 hours of airline travel on 3 planes...
Image

Then once we got out of the airport navigating the train and metro system was another experience.

Travel abroad makes you humble. You take for granted being able to speak and read the native language! Just waiting on some Sangria and Tapas (which just arrived) in our hotel room then it's time for the roof top pool!
Image


Tomorrow we board a 7-day cruise which goes from Barcelona to Italy, France and back to Barcelona!
Scott Meyer
Sonex 1629 - Sold...9/2019
ScottM-Sonex1629
 
Posts: 441
Joined: Sun Aug 11, 2013 10:00 pm
Location: Dublin, Ohio (MRT)

Re: Scott's Sonex #1629 - Progress

Postby MichaelFarley56 » Sat Jun 28, 2014 3:00 pm

ScottM-Sonex1629 wrote:...So after scrambling to make or connection in Newark due to the delayed flight from Columbus, they pushed us back from the gate and we sat on the ramp with the APU running for almost an hour so we would not land too early.


Remember, airline pilots get paid once the airplane is pushed off the gate and not until. That's how the airlines calculate their times.

I'm glad to hear all is well so far Scott! Have fun!
Mike Farley
Waiex #0056 - N569KM (sold)
Onex #245
MichaelFarley56
 
Posts: 1485
Joined: Thu Jun 02, 2011 11:38 pm
Location: Columbus, Ohio

Re: Scott's Sonex #1629 - Progress

Postby ScottM-Sonex1629 » Thu Jul 10, 2014 6:59 pm

Well we are back from our European Vacation. The return flight home make me appreciate flying myself. I hate sitting for hours upon end in an uncomfortable seat with nothing to do...

Here's my favorite picture from the trip: (can you guess the location)?
Image

So I rearranged my garage a little tonight and had my son and friend help me position the fuselage to start on the floor and spar tunnel. This should be fun!

Image

Image
Scott Meyer
Sonex 1629 - Sold...9/2019
ScottM-Sonex1629
 
Posts: 441
Joined: Sun Aug 11, 2013 10:00 pm
Location: Dublin, Ohio (MRT)

Re: Scott's Sonex #1629 - Progress

Postby ScottM-Sonex1629 » Thu Jul 10, 2014 10:00 pm

The floor is positioned and pilot drilled to the longerons!

Image
Scott Meyer
Sonex 1629 - Sold...9/2019
ScottM-Sonex1629
 
Posts: 441
Joined: Sun Aug 11, 2013 10:00 pm
Location: Dublin, Ohio (MRT)

Re: Scott's Sonex #1629 - Progress

Postby Bryan Cotton » Fri Jul 11, 2014 7:32 am

Scott,
No idea where the vacation picture is but the forward fuselage looks great!
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5496
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Scott's Sonex #1629 - Progress

Postby techno-wizard » Fri Jul 11, 2014 8:20 am

I'd say that looks like the Pantheon in Rome...
Keith Borgstrom
Sport Pilot
Currently building legacy Sonex #1598
N5YZ - Reserved
Tri-gear, Aerovee 2.1, dual stick, Sport Trainer configuration
http://www.mykitlog.com/techno-wizar
User avatar
techno-wizard
 
Posts: 11
Joined: Mon Aug 08, 2011 10:01 am
Location: Lyme, NH

Re: Scott's Sonex #1629 - Progress

Postby ScottM-Sonex1629 » Fri Jul 11, 2014 8:36 am

techno-wizard wrote:I'd say that looks like the Pantheon in Rome...



You are correct sir!

Thanks for the comment Bryan. I'm looking forward to getting this stage of the fuselage done. Really want to get the airplane on its landing gear and the engine installed that's built and just siting there looking sad...
Scott Meyer
Sonex 1629 - Sold...9/2019
ScottM-Sonex1629
 
Posts: 441
Joined: Sun Aug 11, 2013 10:00 pm
Location: Dublin, Ohio (MRT)

Re: Scott's Sonex #1629 - Progress

Postby ScottM-Sonex1629 » Sat Jul 12, 2014 3:34 pm

Making steady progress on the foreword fuselage assembly. The firewall and cross tie supports are in. Floor and firewall stiffeners are in. Upper firewall is attached with clecos.

Image

Moving on to the spar zee tunnel. The forward zee is in, located and pilot drilled to the forward wing attach angles.

Image
Scott Meyer
Sonex 1629 - Sold...9/2019
ScottM-Sonex1629
 
Posts: 441
Joined: Sun Aug 11, 2013 10:00 pm
Location: Dublin, Ohio (MRT)

Re: Scott's Sonex #1629 - Progress

Postby MichaelFarley56 » Sat Jul 12, 2014 6:51 pm

Looking great sir! You've been busy this weekend!
Mike Farley
Waiex #0056 - N569KM (sold)
Onex #245
MichaelFarley56
 
Posts: 1485
Joined: Thu Jun 02, 2011 11:38 pm
Location: Columbus, Ohio

PreviousNext

Return to Photo Album

Who is online

Users browsing this forum: No registered users and 9 guests