SonexBuilders.net

A Forum for Sonex Aircraft Builders and Enthusiasts

Skip to content

LogoLogoLogo
random user submitted photo

Dipstick interpretation

Discussion of the Aerovee kit engine.
Post a reply

Re: Dipstick interpretation

Postby Area 51% » Thu Sep 08, 2022 9:06 am

Going to start the next project on the first....................the first chance I get.
Area 51%
 
Posts: 804
Joined: Thu Feb 18, 2016 7:57 am
Top

Re: Dipstick interpretation

Postby Area 51% » Thu Oct 24, 2024 7:05 am

Bryan Cotton wrote:
Area 51% wrote:I also went with the stock VW dipstick for ease of reading. To get the stick in and out, I drilled a hole similar to Bryan's, but added a slot to it long and wide enough to allow passage of the completely stock stick.
Didn't think to add the flap to keep the air in.............Next time.

I had considered that as well - and went with what I presented.

So when is next time scheduled for?


The airframe is mostly complete and am currently working on the control systems. Who knew?
Area 51%
 
Posts: 804
Joined: Thu Feb 18, 2016 7:57 am
Top

Re: Dipstick interpretation

Postby Bryan Cotton » Thu Oct 24, 2024 10:56 am

Area 51% wrote:The airframe is mostly complete and am currently working on the control systems. Who knew?

I always suspected. Glad to see it happening.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5484
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Dipstick interpretation

Postby Area 51% » Thu Oct 24, 2024 11:19 am

I have most of a Legacy fuselage kit lying around if you and Adam want to give it another shot.
Area 51%
 
Posts: 804
Joined: Thu Feb 18, 2016 7:57 am
Top

Re: Dipstick interpretation

Postby Bryan Cotton » Thu Oct 24, 2024 11:44 am

Area 51% wrote:I have most of a Legacy fuselage kit lying around if you and Adam want to give it another shot.

We have a Hummelbird to finish. Then we are going to scratch build a Super Cub. I'm dragging Matthew to the Sportair TIG welding workshop in January.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5484
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Previous
Post a reply

Return to Aerovee

Who is online

Users browsing this forum: No registered users and 17 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

SonexBuilders.net is NOT affiliated with Sonex Aircraft LLC. Discussion contents reflect the views of individual participants only. The owner of SonexBuilders.net makes no guarantees about the correctness or the accuracy of ANY of the information on or in any area or page of SonexBuilders.net. Verify ALL information obtained from SonexBuilders.net with the kit designer, equipment manufacturer, or other original official source before using that information. By participating in this website in any form, (including but not limited to reading, viewing, posting, and private messaging) you agree not to hold the owner (AVED LLC), owner members, forum members, or advertisers of SonexBuilders.net legally liable for information found on any of the pages of the website.

SonexBuilders.net is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.