Well I see that Mike shared his "winter project" now that he finished...he already brought back the clecos he borrowed so it's time for me to continue on with my wing (not that he was holding me up!)
Upper / aft wing skin is mounted to a level and squared up wing...all holes are pilot drilled and updrilled to #30 where called for. This picture is from just the pilot hole drilling stage.
Also completed mounting and final drilling of the aileron hinge...so of course had to test fit the aileron control surface!
Mike had warned me there might be some clearance issues with the counterbalance bolts on the right wing and #12 rib. Fortunately there are no issues on my airframe.
This weekend the plan is to flip the wing and do the lower skin and leading edge skin.