SonexBuilders.net

A Forum for Sonex Aircraft Builders and Enthusiasts

Skip to content

LogoLogoLogo
random user submitted photo

Cotton Waiex 191 - N191YX

Use this area to create a thread with photos from your build.
Post a reply

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Sat Nov 02, 2013 4:18 pm

Tail tips marking
Photo deleted for quota
Last edited by Bryan Cotton on Wed Apr 09, 2014 10:05 pm, edited 1 time in total.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5489
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Thu Nov 07, 2013 12:32 am

Double ended clecos and figure 8 masking tape. Time to rivet, but we won't get a chance until Friday.
Attachments
image.jpg
image.jpg (116.6 KiB) Viewed 277453 times
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5489
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Fri Nov 08, 2013 10:07 pm

Began riveting the skins. Ran out of time, will finish Sunday. Adam let me do the last 10 tonight.
Attachments
image.jpg
Total focus
image.jpg (93.87 KiB) Viewed 277414 times
image.jpg
Chugging through it
image.jpg (104.26 KiB) Viewed 277414 times
image.jpg
No clecos
image.jpg (89.15 KiB) Viewed 277414 times
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5489
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Sun Nov 10, 2013 7:10 pm

Adam got the other sides of the skins riveted as far as we can go before we install the tail on the fuselage. Awesome.
Attachments
image.jpg
One side down, one to go
image.jpg (97.32 KiB) Viewed 277312 times
image.jpg
Riveting and shop- vacing
image.jpg (101.73 KiB) Viewed 277312 times
image.jpg
The finished product
image.jpg (93.11 KiB) Viewed 277312 times
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5489
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Mon Nov 11, 2013 5:13 pm

The stabilizers are wrapped in old t shirts and stored under the workbench. We have started on the ruddervators. I saw this idea for drilling the hinges somewhere.
Workbench storage photo deleted for quota
Attachments
image.jpg
Hinge drilling jig
image.jpg (90.42 KiB) Viewed 277272 times
Last edited by Bryan Cotton on Wed Apr 09, 2014 10:06 pm, edited 1 time in total.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5489
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Mon Nov 11, 2013 7:58 pm

One last stabilizer picture!
Attachments
image.jpg
Two tails!
image.jpg (89.53 KiB) Viewed 277263 times
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5489
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Cotton Waiex 191 - N191YX

Postby Sonex825 » Tue Nov 12, 2013 9:36 pm

Nice drilling jig... Simple, repeatable, effective! I should have made something like that! Oh well, next one!
Sonex825
 
Posts: 28
Joined: Sun Feb 12, 2012 1:06 am
Top

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Sat Nov 16, 2013 4:05 pm

Ruddervator skins trimmed with a cutoff wheel on my grinder. Then the belt sander, files and scotch brite. Drive horns bent and clecoed to the root ribs.
Attachments
image.jpg
Ruddervator progress
image.jpg (92.1 KiB) Viewed 277088 times
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5489
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Sun Nov 17, 2013 6:29 pm

Adam drilled up the left side while I helped Matthew on his project.
Attachments
image.jpg
image.jpg (98.65 KiB) Viewed 277042 times
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5489
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Wed Nov 20, 2013 11:25 pm

Late night at the hangar again. I am drilling skins. The wood is a quick little surrogate rib I made to support the skin while drilling. Helps a lot. One thing I figured out is you don't really have to measure out the holes for the angled part on the root - just lay a straight edge across the other marks and mark the intersection with the line 1/4" from the edge.
Attachments
image.jpg
Drilling skins with the fan tool
image.jpg (113.75 KiB) Viewed 277008 times
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5489
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

PreviousNext
Post a reply

Return to Photo Album

Who is online

Users browsing this forum: No registered users and 2 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

SonexBuilders.net is NOT affiliated with Sonex Aircraft LLC. Discussion contents reflect the views of individual participants only. The owner of SonexBuilders.net makes no guarantees about the correctness or the accuracy of ANY of the information on or in any area or page of SonexBuilders.net. Verify ALL information obtained from SonexBuilders.net with the kit designer, equipment manufacturer, or other original official source before using that information. By participating in this website in any form, (including but not limited to reading, viewing, posting, and private messaging) you agree not to hold the owner (AVED LLC), owner members, forum members, or advertisers of SonexBuilders.net legally liable for information found on any of the pages of the website.

SonexBuilders.net is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.