Battery Master Relay (solenoid)

Use this area for aviation related general discussions, newsworthy items, and non model specific topics.

Battery Master Relay (solenoid)

Postby Cess32cw » Sat Jun 13, 2020 7:17 pm

Pardon my ignorance but I have a question about the battery continuous solenoid. While prepping for my upcoming first flight I noticed that the solenoid is hot to the touch after about 5 minutes of turning on the master switch. None of the surrounding wires or components are warm, only the solenoid which gets very warm/hot. Is this normal? I ordered a new solenoid from ACS and it does the same thing...hot to the touch after about 5 minutes. Any words of wisdom out there?
Cess32cw
 
Posts: 17
Joined: Wed Aug 03, 2016 11:58 am

Re: Battery Master Relay (solenoid)

Postby Sonex1517 » Sat Jun 13, 2020 9:41 pm

A continuous duty solenoid is intended for exactly that - continuous duty. A starter solenoid is intended for short duration use.

Your master solenoid is typically continuous duty, so if yours is hot check to see what you installed.
Robbie Culver
Sonex 1517
Aero Estates (T25)
First flight 10/10/2015
375+ hours
Jabiru 3300 Gen 4
Prince P Tip
Taildragger
N1517S
User avatar
Sonex1517
 
Posts: 1668
Joined: Fri Jun 03, 2011 10:11 am
Location: T25 Aero Estates, Frankston, TX

Re: Battery Master Relay (solenoid)

Postby Bryan Cotton » Sun Jun 14, 2020 12:53 am

Most of them draw about an amp. This is at least 12W of power dissipation. That will cause some heat.

Check out this thread:
viewtopic.php?f=6&t=2009
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5381
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77


Return to General Discussion

Who is online

Users browsing this forum: Google [Bot] and 84 guests