random user submitted photo
Cotton Waiex 191 - N191YX
Re: Cotton Waiex 191 - N191YX
by Bryan Cotton » Tue Oct 29, 2019 12:07 am
Ladies and Gentlemen, I present Bryan's Bane, revision 4. Top view with a oil cooler bolt locker:
Right side plus mag wire exit.
Left side, mag wire exit, and breather.
It's almost too easy.
Right side plus mag wire exit.
Left side, mag wire exit, and breather.
It's almost too easy.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
-
Bryan Cotton - Posts: 5492
- Joined: Mon Jul 01, 2013 9:54 pm
- Location: C77
Re: Cotton Waiex 191 - N191YX
by Bryan Cotton » Sat Nov 09, 2019 2:06 pm
Bondo:
And Bondo dust.
And Bondo dust.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
-
Bryan Cotton - Posts: 5492
- Joined: Mon Jul 01, 2013 9:54 pm
- Location: C77
Re: Cotton Waiex 191 - N191YX
by Bryan Cotton » Sat Nov 09, 2019 10:07 pm
I made lots more dust. I hate composites.
Got my first CHT probe placed. I had to bend to fit.
Got my first CHT probe placed. I had to bend to fit.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
-
Bryan Cotton - Posts: 5492
- Joined: Mon Jul 01, 2013 9:54 pm
- Location: C77
Re: Cotton Waiex 191 - N191YX
by Bryan Cotton » Tue Nov 26, 2019 3:45 pm
Paint.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
-
Bryan Cotton - Posts: 5492
- Joined: Mon Jul 01, 2013 9:54 pm
- Location: C77
Re: Cotton Waiex 191 - N191YX
by Sonex1517 » Tue Nov 26, 2019 4:24 pm
Looking great Bryan!
Robbie Culver
Sonex 1517
Aero Estates (T25)
First flight 10/10/2015
375+ hours
Jabiru 3300 Gen 4
Prince P Tip
Taildragger
N1517S
Sonex 1517
Aero Estates (T25)
First flight 10/10/2015
375+ hours
Jabiru 3300 Gen 4
Prince P Tip
Taildragger
N1517S
-
Sonex1517 - Posts: 1670
- Joined: Fri Jun 03, 2011 10:11 am
- Location: T25 Aero Estates, Frankston, TX
Re: Cotton Waiex 191 - N191YX
by Bryan Cotton » Wed Nov 27, 2019 7:49 pm
Thanks Robbie!
Today I connected my CHTs to my display to verify they survived the bending operation. All was well. Temps were elevated because I was heat-gunning them.
Today I connected my CHTs to my display to verify they survived the bending operation. All was well. Temps were elevated because I was heat-gunning them.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
-
Bryan Cotton - Posts: 5492
- Joined: Mon Jul 01, 2013 9:54 pm
- Location: C77
Re: Cotton Waiex 191 - N191YX
by Bryan Cotton » Sat Nov 30, 2019 12:08 pm
With the CHTs checked out, I ran out of reasons to not install and RTV up my baffles and Bryan's Bane.
Next I am going to install the cowl, wheel pants, and LG fairings. Mainly because it will look cool. Then I am pulling out the panel, bringing it to the bench, and continuing wiring.
Next I am going to install the cowl, wheel pants, and LG fairings. Mainly because it will look cool. Then I am pulling out the panel, bringing it to the bench, and continuing wiring.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
-
Bryan Cotton - Posts: 5492
- Joined: Mon Jul 01, 2013 9:54 pm
- Location: C77
Re: Cotton Waiex 191 - N191YX
by Bryan Cotton » Sat Nov 30, 2019 8:07 pm
Cowl, prop installed.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
-
Bryan Cotton - Posts: 5492
- Joined: Mon Jul 01, 2013 9:54 pm
- Location: C77
Re: Cotton Waiex 191 - N191YX
by WesRagle » Sat Nov 30, 2019 8:37 pm
Awesome!! Won't be long now.
Wes
Wes
Wes Ragle
Onex #89
Conventional Gear
Long Tips
Hummel 2400 w/Zenith Carb
Prince P Tip 54x50
First Flight 06/23/2020
42.8 Hrs. as of 10/30/21
Onex #89
Conventional Gear
Long Tips
Hummel 2400 w/Zenith Carb
Prince P Tip 54x50
First Flight 06/23/2020
42.8 Hrs. as of 10/30/21
- WesRagle
- Posts: 899
- Joined: Fri Jan 05, 2018 12:35 pm
- Location: Weatherford, Tx
Re: Cotton Waiex 191 - N191YX
by Bryan Cotton » Sun Dec 08, 2019 6:28 pm
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
-
Bryan Cotton - Posts: 5492
- Joined: Mon Jul 01, 2013 9:54 pm
- Location: C77
Who is online
Users browsing this forum: No registered users and 14 guests
