Tool loan program

Questions, recommendations, and all things tool related

Tool loan program

Postby Bryan Cotton » Sun Nov 27, 2016 8:27 pm

All,
There is a thread of the same topic name for the Sonex foundation but I can't post there.
viewtopic.php?f=40&t=2516&p=18856
I have the tapered reamer for the mixer and am happy to send it on to the next person. Also, my wing rigging bushings (.3725" OD 1/4" ID) are available.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 4957
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Tool loan program

Postby kevinh » Sat Dec 03, 2016 12:01 pm

Hey Bryan,

In about 9mos-1yr I'll happily take you up on your offer of the bushings loan :D .

Kevin
Taildragger Waiex in progress, tail done, wings done, about to mate wings to fuse,
then cowl, canopy, paint (photos): flush rivets, turbo aerovee, acro ailerons
(I built my RV7A and happily flew it for about 500 hrs)
User avatar
kevinh
 
Posts: 369
Joined: Mon Feb 23, 2015 10:46 pm
Location: San Mateo, CA

Re: Tool loan program

Postby bvolcko38 » Fri Apr 21, 2017 8:59 am

I am ready to ream mixer for taper pin and would like to borrow taper pin reamer, if that is still available.
Bill Volcko XNS0068
Xenos A N68WV 99% flush rivets
Aerovee and Prince P-Tip
MGL Discovery Lite w/ Sandia STX 165R
V6
First hole 4/1/16
First flight 8/24/18
Phase I complete...finally!!!
Also flying a Challenger II since 1999
User avatar
bvolcko38
 
Posts: 259
Joined: Fri Feb 19, 2016 7:40 am

Re: Tool loan program

Postby Bryan Cotton » Fri Apr 21, 2017 11:37 am

Bill,
I'll look for it at the hangar tonight. PM me your address and I'll send it your way.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 4957
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Tool loan program

Postby kevinh » Sun Apr 23, 2017 8:34 pm

If not, I have one I can loan. Though I'm out of the country right now and can't loan it till June 1.
Taildragger Waiex in progress, tail done, wings done, about to mate wings to fuse,
then cowl, canopy, paint (photos): flush rivets, turbo aerovee, acro ailerons
(I built my RV7A and happily flew it for about 500 hrs)
User avatar
kevinh
 
Posts: 369
Joined: Mon Feb 23, 2015 10:46 pm
Location: San Mateo, CA

Re: Tool loan program

Postby Bryan Cotton » Sun Apr 23, 2017 9:34 pm

I've got it boxed and would have had it in the mail today, but the self service machine at the USPO died. I'll get it in the mail tomorrow.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 4957
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Tool loan program

Postby bvolcko38 » Mon Apr 24, 2017 8:10 am

Thank you Bryan. When the next builder needs it, you'll know where it is.
Bill Volcko XNS0068
Xenos A N68WV 99% flush rivets
Aerovee and Prince P-Tip
MGL Discovery Lite w/ Sandia STX 165R
V6
First hole 4/1/16
First flight 8/24/18
Phase I complete...finally!!!
Also flying a Challenger II since 1999
User avatar
bvolcko38
 
Posts: 259
Joined: Fri Feb 19, 2016 7:40 am

Re: Tool loan program

Postby bvolcko38 » Sun Apr 30, 2017 10:34 am

Mixer is reamed and taper pin installed. Ready to send taper pin reamer to the next user.

BV
Bill Volcko XNS0068
Xenos A N68WV 99% flush rivets
Aerovee and Prince P-Tip
MGL Discovery Lite w/ Sandia STX 165R
V6
First hole 4/1/16
First flight 8/24/18
Phase I complete...finally!!!
Also flying a Challenger II since 1999
User avatar
bvolcko38
 
Posts: 259
Joined: Fri Feb 19, 2016 7:40 am

Re: Tool loan program

Postby kevinh » Sat Nov 04, 2017 10:43 am

Do Bryan was kind enough to loan me the bushings he made for wing rigging. They worked great. I'm happy to forward them to the next person who needs them (and happy to take them back if that person doesn't want to handle loaning to the _next_ person). Send me a PM and I'll hook you up. ;-)
Taildragger Waiex in progress, tail done, wings done, about to mate wings to fuse,
then cowl, canopy, paint (photos): flush rivets, turbo aerovee, acro ailerons
(I built my RV7A and happily flew it for about 500 hrs)
User avatar
kevinh
 
Posts: 369
Joined: Mon Feb 23, 2015 10:46 pm
Location: San Mateo, CA

Re: Tool loan program

Postby Sonex1517 » Sat Nov 04, 2017 11:07 pm

kevinh wrote:Do Bryan was kind enough to loan me the bushings he made for wing rigging. They worked great. I'm happy to forward them to the next person who needs them (and happy to take them back if that person doesn't want to handle loaning to the _next_ person). Send me a PM and I'll hook you up. ;-)


Just as a reminder to everyone, we have an informal tool loan program via the Sonex Builders and Pilots Foundation, in addition to this ongoing post.

Check out http://www.sonexfoundation.com/Tool_Loan_Program.php

Not sure who has the taper reamer right now. I used it on my controls and am very happy with the results.

Always good to see folks helping one another.
Robbie Culver
Sonex 1517
Aero Estates (T25)
First flight 10/10/2015
325+ hours
Jabiru 3300 Gen 4
Prince P Tip
Taildragger
N1517S
User avatar
Sonex1517
 
Posts: 1649
Joined: Fri Jun 03, 2011 10:11 am
Location: Chicagoland

Next

Return to Tools

Who is online

Users browsing this forum: No registered users and 0 guests