by WaiexN143NM » Wed Jan 27, 2016 2:44 pm
Hi,
Cleveland dimple die page lists 2 dies for 1/8 pulled rivets, the one you want is a new one they came up with about a year ago, labeled 'DIENQ' . Drill to 40, dimple (has a smaller nub) , hole now almost ready for 1/8 rivet. C51 had a good idea , try a #32bit , keep the hole tight. So little material is removed after dimpling that deburring not an issue. Click on the pick/ link for 'DIENQ' it will give more info . Hope this helps. A little more work with your solid rivets, but will look great! Also ,yes the nose ribs easy to create a bump when u wrap skin. Good idea on filing the rib. Thanks to all for suggesting tips.
WaiexN143NM
Michael Radtke