There are 3 holes on the bottom that get drilled through a lot of stuff- splice plate, shim, channel, and bottom tailcone skin. Now that those holes are all drilled to #30, I need the same 3 holes in the cockpit floor skin. Started with a piece of scrap and transferred the 3 holes from the shim to the scrap. I clecoed the scrap to all that stackup I mentioned. Then I picked up 3 holes along the longeron by drilling up from underneath.
![Image](http://i198.photobucket.com/albums/aa72/Aerowerk/ADA4577E-DA6B-4552-806C-BEAD4F132813.jpg)
Now I put the front skin down and put the tool over the top:
![Image](http://i198.photobucket.com/albums/aa72/Aerowerk/284FE6F4-359F-48E0-9D93-0D3A8DC14C5E.jpg)
Then I transfer the holes:
![Image](http://i198.photobucket.com/albums/aa72/Aerowerk/0A2653D7-5F5F-46AE-800A-345992B9E3C6.jpg)
On the dents thread, I hope nobody thought I was serious about grand champion. Means a lot more to me to build it with my kid. Plus this thread is mostly trick photography.