Re: AeroVee cabin heat
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Fastcapy wrote:I am currently building my cabin heat components. I decided to try 1.5" SCAT because I have heard 2" can push too much air through. I also baffled the output hole of the heat muff. I will be packing the muff (altered the muff plans I found on the Sonextalk site) with stainless steel choreboy type scrubbers, as I have seemed to read other places that those seem to radiate the heat better than the spring. I guess we will see. Once we get out of the negative temps (-35f with wind chill) I will head back out to work on it.
Another good idea :-) I'm making this muff removable for inspection, but that will also allow me to try other materials inside. Even when you're "done" building, you're never "done."