Safe distance from exhaust

Discussion of the Aerovee kit engine.

Safe distance from exhaust

Postby Darick » Wed Jan 04, 2017 5:39 pm

Guys, the oil separator return line (Russel Proflex SS hose) is 3/4" from the wrapped exhaust. Is this too close? Do I need to add a heat shield? I couldn't find a max temp spec for the hose.

Image

Don't mistake the oil cooler hose for the oil separator line. The separator line is a little hard to see but it makes a 180 out of the front of the engine and goes back along side, right next to the engine.
Darick Gundy
Sonex #1646
N417DG
Taildragger, Aerovee, center stick, Prince P-Tip Prop
MGL E1, F2, V6 radio, Sandia Xponder, Reserve lift indicator (AOA), iFly 520
First flight! 10/21/2017
User avatar
Darick
 
Posts: 496
Joined: Mon Aug 05, 2013 9:39 pm
Location: PA

Re: Safe distance from exhaust

Postby mike.smith » Wed Jan 04, 2017 9:28 pm

For the oil line I think you're fine. But adding fire sleeve to all your fuel and oil lines is not a bad idea for safety reasons. It would add another layer against heat as well.
Mike Smith
Sonex N439M
Scratch built, AeroVee, Dual stick, Tail dragger
http://www.mykitlog.com/mikesmith
mike.smith
 
Posts: 1409
Joined: Tue Jan 29, 2013 8:45 pm

Re: Safe distance from exhaust

Postby kmacht » Wed Jan 04, 2017 9:56 pm

Looks just like mine and I have had no issues.

You might want to reconsider the separator line though. It looks like a solid line that isn't supported along the side of the engine. The vw vibrates alot. A fatigue crack in that line while flying could empty the whole crank case of oil in short order.

Keith
kmacht
 
Posts: 756
Joined: Tue Jun 21, 2011 11:30 am


Return to Aerovee

Who is online

Users browsing this forum: No registered users and 4 guests