Re: Battery Box for tail dragger problem
Posted:
Fri Mar 28, 2014 7:00 pm
by mike.smith
That's what I did, too.
Mike (the other Mike) :-)
Re: Battery Box for tail dragger problem
Posted:
Fri Mar 28, 2014 8:48 pm
by onex0127
Hay all: Again thanks much for the help.
Roy Taylor
Re: Battery Box for tail dragger problem
Posted:
Sat Mar 29, 2014 10:41 pm
by onexpilot
That's a good idea! We figure we are going to have to cut the battery out when the time comes
Re: Battery Box for tail dragger problem
Posted:
Mon Mar 31, 2014 9:38 am
by onex0127
- new battery box 2.jpg (463.45 KiB) Viewed 3740 times
- new battery box 1.jpg (468.13 KiB) Viewed 3740 times
Just wanted to show you how it turned out. It worked.
Re: Battery Box for tail dragger problem
Posted:
Tue Apr 01, 2014 10:22 am
by dallen
Had the same problem with my plane. What I did was drill the rivets out on the outside vertical and install nutserts and screws. I can get the battery out on the side.
Re: Battery Box for tail dragger problem
Posted:
Fri May 16, 2014 4:01 pm
by Forester818
I've read the battery box posts, but can't find reference to this: I built the box to the plans but found the bottom of the box came out 1/2" too short; also, it appears on initial fitting that the longer sides make it impossible to fit the box on the designated firewall position and have it clear the engine mount.
Should the whole thing be built to conform to the shorter bottom panel; I found no plan amendment, so appreciate any feedback.
Thanks,
Bud Taylor
Tulare, CA
Re: Battery Box for tail dragger problem
Posted:
Sat May 17, 2014 10:25 am
by onex0127
Hey Bud: I ended up just taking the demolitions off the battery and adding 1/8" . The first battery box I built did not work. If you want to call me I can walk you through what I did.
410-391-3131
Roy Taylor
Baltimore