Torque Settings

Discussion for builders, pilots, owners, and those interested in building or owning a Onex.

Torque Settings

Postby Bacon8tor » Thu Jan 16, 2014 7:30 pm

Are there specific torque settings for the nuts in the tail assembly (or the rest of the airframe for that matter)? I don't see where they are mentioned in the plans. Just Gutten tight?
John Bacon
Henderson, NV
Onex 164 N702JB Reserved
95% done.....
Bacon8tor
 
Posts: 49
Joined: Mon Aug 19, 2013 10:20 pm

Re: Torque Settings

Postby ScottM-Sonex1629 » Thu Jan 16, 2014 7:39 pm

I was wondering the same thing, good question!
Scott Meyer
Sonex 1629 - Sold...9/2019
ScottM-Sonex1629
 
Posts: 441
Joined: Sun Aug 11, 2013 10:00 pm
Location: Dublin, Ohio (MRT)

Re: Torque Settings

Postby SvingenB » Thu Jan 16, 2014 8:18 pm

Reserved LN-ENX for Onex #134
Onex build log
SvingenB
 
Posts: 125
Joined: Tue Oct 08, 2013 5:38 pm

Re: Torque Settings

Postby Bryan Cotton » Thu Jan 16, 2014 8:43 pm

The official source would be the hardware chapter in AC43.13.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 4953
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77


Return to Onex

Who is online

Users browsing this forum: No registered users and 6 guests