May have been overzealous

Discussion for builders, pilots, owners, and those interested in building or owning a Onex.

May have been overzealous

Postby EdW » Sat Mar 10, 2018 2:52 am

While admiring my work this evening, I notice I might have gone too far with my riveting. I riveted the vertical tail hinge all the way to the bottom, but the drawing seems to stop the riveting at the bottom of the skin tab.

Is this correct? Does some later attachment to the fuselage account for this? The drawing doesn't say, one way or the other.

Ed

Onex standard gear
On the short list for full kit delivery
Tail kit finished
Plan on normally aspirated AeroVee
'inappropriate' name
EdW
 
Posts: 64
Joined: Wed Nov 01, 2017 10:18 pm

Re: May have been overzealous

Postby Gordon » Sat Mar 10, 2018 12:33 pm

Vertical Stab Rivets

Ed........those bottom 12 rivets are left until later (much later) when you do the final installation of the tail onto the fuselage. You will have to drill out those 12 rivets and just cleco them for now.

It's no big deal.......lesson learned. There will be some more of those "got yah" moments before you finish this airplane. I am at the 95 per cent stage. Will be moving to the airport next month.

Gordon........Onex......Hummel 2400
Gordon
 
Posts: 178
Joined: Thu Sep 07, 2017 9:20 pm

Re: May have been overzealous

Postby EdW » Sat Mar 10, 2018 7:28 pm

Thanks, Gordo...I'm beginning to feel like that 30 year old father whose son thinks he's the dumbest soul on earth. Getting dumber all the time!

Ed
EdW
 
Posts: 64
Joined: Wed Nov 01, 2017 10:18 pm


Return to Onex

Who is online

Users browsing this forum: No registered users and 7 guests