Engine control cables

Discussion for builders, pilots, owners, and those interested in building or owning a Onex.

Engine control cables

Postby surfly » Wed May 24, 2017 3:04 pm

I am using an AeroVee engine with an Aero Injector carb.I would appreciate any comments and photos of routing and where any other builders penetrated their firewall for the Aero Injector control cables.
Blue Side Up,
Surfly
Onex 0176
surfly
 
Posts: 67
Joined: Wed Oct 01, 2014 3:25 pm

Re: Engine control cables

Postby Dennis W. » Wed May 24, 2017 7:22 pm

Here's how I routed mine. Came thru upper left side of firewall using cable safes and made a support plate mounted to valve cover bolts and another support using unused stud on left side of engine block. About 100 hrs and so far so good.
Attachments
Control Cable.jpg
Dennis W.
 
Posts: 29
Joined: Sat May 13, 2017 8:25 am

Re: Engine control cables

Postby surfly » Thu May 25, 2017 6:49 am

Dennis,
Very secure looking setup. My airplane is a ONEX so the rocker box covers extend out thru the engine cowl. I think I will have to penetrate the firewall at a lower location and clamp my cables to the engine mount.
Thank you for your response.
Fly On!!
Surfly
surfly
 
Posts: 67
Joined: Wed Oct 01, 2014 3:25 pm


Return to Onex

Who is online

Users browsing this forum: No registered users and 6 guests