Onex Rudder cable routing

Discussion for builders, pilots, owners, and those interested in building or owning a Onex.

Onex Rudder cable routing

Postby thomasjones42 » Sun Jun 01, 2014 9:58 pm

Has anybody had a problem with the routing of the right side rudder cable. As I ran mine today I find it sharing a frame hole with the elevator control rod and doing sort of a half wrap on the elevator control rod enroute to the final frame hole behind the seat. Not certain if I have missed something in the plans or what.
thomasjones42
 
Posts: 77
Joined: Wed Sep 04, 2013 12:26 pm

Re: Onex Rudder cable routing

Postby onex28 » Sun Jun 01, 2014 10:30 pm

There have been revisions on the relocation of some of the routing holes. I simply put the holes and added a pulley so I had a run clear of the elevator control rod. I moved the first pulley to the outside of the first former and added a pulley in the vertical position to the next former. Pics on my PC that doesn't send. PM me if you want pics and I'll take some for you.

David
onex28
 
Posts: 219
Joined: Thu Jun 09, 2011 9:43 pm
Location: MN

Re: Onex Rudder cable routing

Postby onex0127 » Tue Jun 03, 2014 4:43 pm

I attached the elevator push pull tube on the inboard side, this gave me plenty of room for the rudder cable outboard.
2013-09-23_13-37-54_953.jpg
Right side rudder cable
2013-09-23_13-37-54_953.jpg (384.23 KiB) Viewed 1997 times
onex0127
 
Posts: 22
Joined: Tue Mar 25, 2014 3:40 pm

Re: Onex Rudder cable routing

Postby onex0127 » Tue Jun 03, 2014 4:48 pm

This is on with the elevator trim. It works
Attachments
2014-04-02_15-29-35_472.jpg
Right Rudder cable
2014-04-02_15-29-35_472.jpg (409.15 KiB) Viewed 1997 times
onex0127
 
Posts: 22
Joined: Tue Mar 25, 2014 3:40 pm

Re: Onex Rudder cable routing

Postby onex0127 » Tue Jun 03, 2014 4:52 pm

I hope this helps
onex0127
 
Posts: 22
Joined: Tue Mar 25, 2014 3:40 pm


Return to Onex

Who is online

Users browsing this forum: No registered users and 6 guests