Page 1 of 1
Tilt back Canopy
Posted:
Sun Aug 13, 2017 11:06 amby x3 skier
Has anyone adapted the ASA Sonex tiltback Canopy to a Onex? I asked the designer and he didn't know of any. Having that feature is something I really want, in addition to bonding the Canopy vs drilling.
It looks fairly easy to adapt but if it's been done before, I'd be very interested to see what mods were made to the original design.
Re: Tilt back Canopy
Posted:
Sun Aug 13, 2017 4:45 pmby wlarson861
Since the Onex canopy and frame are the same as the Sonex the attachment should be the same only smaller parts. Set the swing arms first and from that you cam determine the length of the top hinge arm and pivot location. I used the asa plans and video to get a general idea of how to construct it but I made all the parts in the field. For latches I used the plans latch and a mirror image part for the right side latch. I can lock the canopy with padlocks the same as the plans latches.
Re: Tilt back Canopy
Posted:
Wed Sep 26, 2018 2:54 pmby EdW
3x did you make the tilt-back? How did it work out?
Ed
Onex 209, td, Aerovee, MGL(?)