WIX-F10-24 Waiex attach plates

[wingnut99]

Anybody know where these attach plates go?
The parts box is pretty empty and I haven't run across them on the plans yet. Looked over the plans several times and have not seen them. Also I have 2 hat sections that I haven't seen on the plans either. Look like a cover for pushrods maybe?
Thanks

[Sonex1517]

I wanted to bump this up. Didn’t see a reply.

[scotttro]

Up at the top of F10, just left of the "The information disclosed herein" box; they go on either side of the cap assembly. They're visible in F09 too, by the reference arrows for C-C.

[epeachey]

I had the same left over parts so I sent a picture and request for help to sonex support. Reply copied below.

Those parts are packing list errors, carried over from the Legacy Waiex packing lost. The XNS-Z04-01 Hat Section covered an exposed elevator pushrod in the middle of the seat and the gussets are part number WIX-F10-24, also used in the installation of the Legacy Waiex seat.

Thank you for bringing these to our attention. I will make sure they are removed from the packing list.
Blue Skies…..

Kerry
Sonex Aircraft Tech Support