Darick's Sonex #1646

Use this area to create a thread with photos from your build.

Re: Darick's Sonex #1646

Postby Bryan Cotton » Thu Jul 06, 2017 10:42 am

Great idea! Especially since the wide angle stock seems to be unavailable.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 4957
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Darick's Sonex #1646

Postby N111YX » Thu Jul 06, 2017 1:06 pm

I often wish I had taken the time to install a Hartwell latch on my oil door! Installing a latch on the round door would have been more complex and taken some time. I was ready to fly...

SonexN76ET wrote:Image

This is my fuel door prior to final finish and paint with the Hartwell latch.

There is a small aluminum strip underneath the passenger side of the opening for the rule door about 3/8ths of an inch wide that runs the length of the opening that the latch secures to when you close it.

Kip originally shared this idea with me. You can see his on YouTube under his Waiex walk around video.

Jake
Kip

2010 Waiex 0082 (first flight May 2010)
Jabiru 3300 #1637 and #3035
Dynon D-180
Becker radios
Garmin GDL 82 ADS-B
1050 hours
48 states visited
Based near Atlanta

Also flying a...
2000 Kolb Firestar II, Rotax 503, 575 hours
N111YX
 
Posts: 705
Joined: Fri Jun 03, 2011 9:43 am
Location: Atlanta, GA USA

Re: Darick's Sonex #1646

Postby sonex892. » Fri Jul 07, 2017 8:40 pm

N111YX wrote:I often wish I had taken the time to install a Hartwell latch on my oil door! Installing a latch on the round door would have been more complex and taken some time. I was ready to fly...

Not sure if doing this would work with the oil filler location on the VW? I would think massaging a door from 032" or 040" into shape would be possible. Only the hinge line needs to be straight. Other than simplicity there is no need to make a round door for the 3300 filler.
Steve
Sonex 892
Image
Steve
Lazair kit 1981 sold
Sonerai 2LS plansbuilt 2003 sold
Sonex kit 2010
Sonerai 2LS project rotax 912
User avatar
sonex892.
 
Posts: 392
Joined: Tue Oct 27, 2015 12:32 am

Re: Darick's Sonex #1646

Postby Darick » Thu Jul 20, 2017 5:58 pm

Image

Canopy cutting is almost done. I started out using a friend's bandsaw with an 8 tooth per inch blade..wow, way to coarse...should have had a 24 or more blade because it took out big chunks up to 1/16" in size. The cut had many facets, like a gem stone has many facets. Luckily this was the first cut and had about an inch more to cut off.

I read Michael Smith's blog about his replacement canopy and how he used a Dremel tool with a cut off wheel. After getting the hang of it with a few test cuts, I thought it worked well. It's not nearly as fast as a bandsaw as shown on the factory video, but the cut is smooth because it melts the plexiglass in the process. Any rough edges were smoothed with 80 thru 180 sandpaper.

HOWEVER, what's up with the big bulge on the sides! I feel like I'm dealing with the cowl again. There is no dolphin nose effect on the top but it sure is on the longeron sides where it must be fastened to the frame. It will take a lot of pressure to push it against the frame.

The picture below is upside down but you can see how much the canopy will have to be pushed in for the rivets to be set.

Image

Ok this picture is right side up but out of focus. You can still make out the large angle between the plexiglass and fuselage side. If I push in the canopy with enough force it will bend in enough to be at 90 degrees to the frame member (almost an "oil can" flex). But that seems to be way too much tension and would probably crack. What is the experience of others on this?
Image

Above my thumb you can see the plexiglass pot-belly bulging out.
Last edited by Darick on Sun Aug 06, 2017 10:34 pm, edited 1 time in total.
Darick Gundy
Sonex #1646
N417DG
Taildragger, Aerovee, center stick, Prince P-Tip Prop
MGL E1, F2, V6 radio, Sandia Xponder, Reserve lift indicator (AOA), iFly 520
First flight! 10/21/2017
User avatar
Darick
 
Posts: 496
Joined: Mon Aug 05, 2013 9:39 pm
Location: PA

Re: Darick's Sonex #1646

Postby ScottM-Sonex1629 » Thu Jul 20, 2017 7:47 pm

Darrick:

That does look "normal" for the side of the canopy. I felt the same way when I got mine to that point but was reassured that's the way they fit. Mine has been good for over 2 years with no cracks. There is a newer video on how to drill the holes on the Sonex/EAA website and do yourself a favor / look it up. They recommend a stepped uni-bit now to drill the holes. Worked great for me.
Scott Meyer
Sonex 1629 - Sold...9/2019
ScottM-Sonex1629
 
Posts: 441
Joined: Sun Aug 11, 2013 10:00 pm
Location: Dublin, Ohio (MRT)

Re: Darick's Sonex #1646

Postby sonex892. » Thu Jul 20, 2017 8:19 pm

I didnt like the idea of riveting the perspex, also think there should be more edge distance from the holes. Add the fact that the perspex is stressed at that point. Here is what I did to increase the edge distance and support the perspex.
Image
Image
Steve
Lazair kit 1981 sold
Sonerai 2LS plansbuilt 2003 sold
Sonex kit 2010
Sonerai 2LS project rotax 912
User avatar
sonex892.
 
Posts: 392
Joined: Tue Oct 27, 2015 12:32 am

Re: Darick's Sonex #1646

Postby Darick » Tue Aug 08, 2017 9:17 am

I'm on the last few items on my punch list...engine baffles, leg fairings, minor changes to the wheel pants and the last major item-canopy. I'll post some pictures in the next few days on the canopy. For now though, here is my canopy lock.

Image

I had made the plans lock pieces some time ago so that's what I used for now. I'd like a more finished look to the outside "handle"...something more ergonomic. That's a winter project. I also replaced the rivets on the handle to machine screws. The other piece to the factory lock won't be used...see the next picture below.

Image
The cam is long enough so it will lock in the partially open position too (not shown).
Image


Coincidentally the cam of the lock is the exact distance from the side skin to the canopy latch. I made the small bend at the top of the cam just to make sure the latch couldn't "sneak" past, as there is a fair amount of play in the locking rail system.

Here is the lock I found in McMaster-Carr...
Image
Last edited by Darick on Sat Sep 02, 2017 2:02 pm, edited 1 time in total.
Darick Gundy
Sonex #1646
N417DG
Taildragger, Aerovee, center stick, Prince P-Tip Prop
MGL E1, F2, V6 radio, Sandia Xponder, Reserve lift indicator (AOA), iFly 520
First flight! 10/21/2017
User avatar
Darick
 
Posts: 496
Joined: Mon Aug 05, 2013 9:39 pm
Location: PA

Re: Darick's Sonex #1646

Postby Bryan Cotton » Tue Aug 08, 2017 9:49 am

Darick,
Nicely done!
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 4957
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Darick's Sonex #1646

Postby Darick » Thu Aug 10, 2017 9:56 pm

Ok I'm finally finished with the canopy.

Before...
Image
After...
Image

Another view...
Image

I thought I would get finished without any cracks...WRONG! One started at the outside handle slot going down. The "stop hole" was covered up by the trim piece. The other one was from a rivet hole on the hinge side but will also be covered up by the aluminum trim piece.

The canopy installation ran a close second on the frustration scale, to the cowl which still holds first place in my book. I had one major misfit on the canopy...at the 11:00 aft position, which will be above the pilot's head, the canopy sits proud above the fuselage. I was too far along when this became apparent, to change it. Maybe in a few years I'll make a swing back canopy.
Darick Gundy
Sonex #1646
N417DG
Taildragger, Aerovee, center stick, Prince P-Tip Prop
MGL E1, F2, V6 radio, Sandia Xponder, Reserve lift indicator (AOA), iFly 520
First flight! 10/21/2017
User avatar
Darick
 
Posts: 496
Joined: Mon Aug 05, 2013 9:39 pm
Location: PA

Re: Darick's Sonex #1646

Postby Darick » Thu Aug 31, 2017 10:35 pm

I recently received the K&N air filter which I installed. It is about 1/4" higher which necessitated shortening the carb/intake manifold distance otherwise it would have rubbed the cowl.

Today I put 24 oz of fuel in the tank, checked for leaks...only one loose connection. Tomorrow will install Peter Anson's modified tailwheel steering rod, add a few instrument panel labels and I'm ready to take it to the airport. It's been 4 years but I'll miss my time in the garage, building every day. If I'd be younger I'd think about building another plane.
Image
Darick Gundy
Sonex #1646
N417DG
Taildragger, Aerovee, center stick, Prince P-Tip Prop
MGL E1, F2, V6 radio, Sandia Xponder, Reserve lift indicator (AOA), iFly 520
First flight! 10/21/2017
User avatar
Darick
 
Posts: 496
Joined: Mon Aug 05, 2013 9:39 pm
Location: PA

PreviousNext

Return to Photo Album

Who is online

Users browsing this forum: No registered users and 7 guests