Cotton Waiex 191 - N191YX

Use this area to create a thread with photos from your build.

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Tue Oct 29, 2019 12:07 am

Ladies and Gentlemen, I present Bryan's Bane, revision 4. Top view with a oil cooler bolt locker:
Bryan's Bane hopefully done 1.jpg


Right side plus mag wire exit.
Bryan's Bane hopefully done 2.jpg


Left side, mag wire exit, and breather.
Bryan's Bane hopefully done 3.jpg


It's almost too easy.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5489
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Sat Nov 09, 2019 2:06 pm

Bondo:
IMG_20191104_222304054.jpg


And Bondo dust.
IMG_20191109_095650389.jpg
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5489
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Sat Nov 09, 2019 10:07 pm

I made lots more dust. I hate composites.
IMG_20191109_173236138.jpg


Got my first CHT probe placed. I had to bend to fit.
IMG_20191109_191034987.jpg
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5489
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Tue Nov 26, 2019 3:45 pm

Paint.

three coats 1.jpg


three coats 3.jpg
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5489
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cotton Waiex 191 - N191YX

Postby Sonex1517 » Tue Nov 26, 2019 4:24 pm

Looking great Bryan!
Robbie Culver
Sonex 1517
Aero Estates (T25)
First flight 10/10/2015
375+ hours
Jabiru 3300 Gen 4
Prince P Tip
Taildragger
N1517S
User avatar
Sonex1517
 
Posts: 1670
Joined: Fri Jun 03, 2011 10:11 am
Location: T25 Aero Estates, Frankston, TX

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Wed Nov 27, 2019 7:49 pm

Thanks Robbie!

Today I connected my CHTs to my display to verify they survived the bending operation. All was well. Temps were elevated because I was heat-gunning them.
CHT test.jpg
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5489
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Sat Nov 30, 2019 12:08 pm

With the CHTs checked out, I ran out of reasons to not install and RTV up my baffles and Bryan's Bane.
Bryan's Bane RTV.jpg


Next I am going to install the cowl, wheel pants, and LG fairings. Mainly because it will look cool. Then I am pulling out the panel, bringing it to the bench, and continuing wiring.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5489
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Sat Nov 30, 2019 8:07 pm

Cowl, prop installed.
cowl and prop 2.jpg
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5489
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cotton Waiex 191 - N191YX

Postby WesRagle » Sat Nov 30, 2019 8:37 pm

Awesome!! Won't be long now.

Wes
Wes Ragle
Onex #89
Conventional Gear
Long Tips
Hummel 2400 w/Zenith Carb
Prince P Tip 54x50
First Flight 06/23/2020
42.8 Hrs. as of 10/30/21
WesRagle
 
Posts: 899
Joined: Fri Jan 05, 2018 12:35 pm
Location: Weatherford, Tx

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Sun Dec 08, 2019 6:28 pm

outside 1.jpg
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5489
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

PreviousNext

Return to Photo Album

Who is online

Users browsing this forum: No registered users and 19 guests