Propeller Bolts

Anything related to props

Propeller Bolts

Postby eppre » Tue Aug 12, 2014 9:07 pm

Hi guys,

I have the Sensenich prop for the aerie and can't find what size and length the bolts are. Can anyone help?
eppre
 
Posts: 51
Joined: Tue Mar 25, 2014 8:16 am

Re: Propeller Bolts

Postby rizzz » Tue Aug 12, 2014 11:29 pm

And while we're at it, what size bolts do people have on their Prince P-Tip?
Michael
Sonex #145 from scratch (mostly)
Taildragger, 2.4L VW engine, AeroInjector, Prince 54x48 P-Tip
VH-MND, CofA issued 2nd of November 2015
First flight 7th of November 2015
Phase I Completed, 11th of February 2016
http://www.mykitlog.com/rizzz/
rizzz
 
Posts: 869
Joined: Tue Jun 21, 2011 2:07 am
Location: Wollongong, NSW, Australia

Re: Propeller Bolts

Postby Sonex1462 » Wed May 13, 2015 12:26 am

What size and type of bolts are being used for the Sensenich propeller on the Aerovee engine?

Thanks
John Stewart
Sonex 1462
Kit, Aerovee, Tri Gear, ST Controls

Website: http://stewartaircraft.net
Sonex1462
 
Posts: 135
Joined: Thu May 16, 2013 8:08 pm

Re: Propeller Bolts

Postby wlarson861 » Wed May 13, 2015 12:41 am

for the turbo with the Sensenich Cruise prop they are an-5-4 you need to put the prop on and measure to be SURE. Washers required or desired will make a difference. I didn't use a washer under the bolt by the spinner so I could have one behind the bushing. Now I have one under the bolt head and two behind the prop head under the nut. Unfortunately its a trial fit scenario and a few days wait for the hardware to arrive in the mail.
Bill Larson
N861SX
Sonex, polished, tail wheel, Generation 4 Jabiru 3300
wlarson861
 
Posts: 497
Joined: Wed Dec 05, 2012 11:41 pm


Return to Propellers

Who is online

Users browsing this forum: No registered users and 5 guests