Hangar style bifold garage doors

For non Aviation related discussions.

Hangar style bifold garage doors

Postby ihab » Sat Feb 13, 2016 1:57 pm

Dear Sonexites,

My wife and I just bought a new house and the garage door is the now-traditional sliding type, which when open covers the ceiling, obscuring any ceiling lights and making ceiling-mounted storage in the area of the door impossible. Surely this is something that has plagued airplane builders everywhere. Does it not annoy you folks that the rollup garage door gives you less room to hang completed wings from the rafters?

With an eye to optimizing my garage -- and who knows what evil I might get up to later ;) -- I wonder if anyone has built an alternative bi-fold hangar style door. The commercial ones are of course exhorbitantly expensive, but it can't be too hard to build two panels and a bunch of hinges, with a skate wheel on either end running in a metal channel, can it...?

Here's a DIY project: https://www.youtube.com/watch?v=Qd5H_A4j8d8

Here's another one: https://www.youtube.com/watch?v=EIqfLuASe_c

Attached is a picture of my garage and how I might do this.

Ihab
Attachments
garage-door.png
Ihab Awad, San Jose, CA
ihab
 
Posts: 159
Joined: Sat Mar 09, 2013 1:45 pm
Location: San Jose, CA (KRHV)

Re: Hangar style bifold garage doors

Postby Bryan Cotton » Sat Feb 13, 2016 5:10 pm

Ihab,
I hang my canoe from the garage ceiling. When the garage door opens it goes over the end of the canoe. You should spend your time and $ on a tail kit!
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 4957
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Hangar style bifold garage doors

Postby SNX1508 » Sun Feb 14, 2016 4:54 am

ihab wrote:Dear Sonexites,

My wife and I just bought a new house and the garage door is the now-traditional sliding type, which when open covers the ceiling, obscuring any ceiling lights and making ceiling-mounted storage in the area of the door impossible. Surely this is something that has plagued airplane builders everywhere. Does it not annoy you folks that the rollup garage door gives you less room to hang completed wings from the rafters?

With an eye to optimizing my garage -- and who knows what evil I might get up to later ;) -- I wonder if anyone has built an alternative bi-fold hangar style door. The commercial ones are of course exhorbitantly expensive, but it can't be too hard to build two panels and a bunch of hinges, with a skate wheel on either end running in a metal channel, can it...?

Here's a DIY project: https://www.youtube.com/watch?v=Qd5H_A4j8d8

Here's another one: https://www.youtube.com/watch?v=EIqfLuASe_c

Attached is a picture of my garage and how I might do this.

Ihab


How about an aluminum roll up door.....

http://www.rinderledoor.com/product/hig ... roll-doors

Terry
Terry
Sonex #1508
N296SX
AeroVee #0736
Tail Dragger
http://www.mykitlog.com/SNX1508
SNX1508
 
Posts: 69
Joined: Sun Dec 11, 2011 6:53 am

Re: Hangar style bifold garage doors

Postby Darick » Sun Feb 14, 2016 10:59 am

Ihab,
I have a 20' X 20' two garage with the usual doors and no headroom above them when open. I understand your concern for space but I've been able to build my Sonex "in my half". When my wife goes to work (I'm retired) I can use her half during the day but must relinquish it when she gets home. So far the arrangement has worked fine but now with the fuselage soon getting the engine hung, I can see a potential problem.

So I would agree with Bryan and worry about the doors later.
Darick Gundy
Sonex #1646
N417DG
Taildragger, Aerovee, center stick, Prince P-Tip Prop
MGL E1, F2, V6 radio, Sandia Xponder, Reserve lift indicator (AOA), iFly 520
First flight! 10/21/2017
User avatar
Darick
 
Posts: 496
Joined: Mon Aug 05, 2013 9:39 pm
Location: PA

Re: Hangar style bifold garage doors

Postby ihab » Sun Feb 14, 2016 12:44 pm

SNX1508 wrote:How about an aluminum roll up door.....


Wow, interesting. Never thought of that! And much simpler too!

Darick wrote:So I would agree with Bryan and worry about the doors later.


Got it, thank you!

Ihab
Ihab Awad, San Jose, CA
ihab
 
Posts: 159
Joined: Sat Mar 09, 2013 1:45 pm
Location: San Jose, CA (KRHV)

Re: Hangar style bifold garage doors

Postby DCASonex » Mon Feb 15, 2016 9:21 am

Won't help overhead storage space, but if for some reason you want additional lighting when door is open, mount lights on the door. the new LED replacements for 4 ft. shop lights would seem ideal for that.

David A.
DCASonex
 
Posts: 900
Joined: Mon Sep 12, 2011 8:04 pm
Location: Western NY USA


Return to Off Topic

Who is online

Users browsing this forum: No registered users and 2 guests