R/C

For non Aviation related discussions.

R/C

Postby Bryan Cotton » Sun May 25, 2014 4:46 pm

We got our trainer out for the first time in a couple years. I overestimated my ability to recover via the buddy box. Too rusty.
Image
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5034
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: R/C

Postby MichaelFarley56 » Sun May 25, 2014 5:00 pm

I used to fly gas R/C back in the day but lately I'm a believer in electric. I love the Parkzone stuff, especially the T-28 and P-47. I always keep a few foamies at my hangar for calm nights!!
Mike Farley
Waiex #0056 - N569KM
Jabiru 3300A #1706
MGL Panel
MichaelFarley56
 
Posts: 1473
Joined: Thu Jun 02, 2011 11:38 pm
Location: Columbus, Ohio

Re: R/C

Postby Bryan Cotton » Sun May 25, 2014 5:22 pm

I have been in and out of the hobby since I was 8. Hard to keep in it while building the Waiex.

I got back into it at age 23, when I had been out of it since I was 15. My helicopter instructor showed me where his R/C field was. I was out solo and saw his car there. Carefully went back IFR (I follow roads) so I could ride back after. He was flying when I got there. The smell of burned glow fuel triggered a strong nostalgic reaction. Probably why I have not gone electric.

He asked if I wanted to try it then was amazed that I could fly. Then I had to confess my years of experience.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5034
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: R/C

Postby fastj22 » Sun May 25, 2014 8:00 pm

I was into RC before I became a pilot. First gas, then helicopters and then the foam electrics were just coming online. I quit when I went for my private license 6 years ago. Sold most of my planes but kept my gas helicopter and a large sailplane. I've been thinking of firing them back up but not sure I could find all my support gear. My nephew went through a lot of it when he found out I gave it up. I understand you don't even buy a radio/receiver crystals anymore.

John Gillis
SEL Private, Comm Glider, Tow pilot (Pawnee Driver)
Waiex N116YX, Jabiru 3300, Tail dragger,
First flight, 3/16/2013. 403 hours and climbing.
Home: CO15. KOSH x 5
Flying a B-Model Conversion (Super Bee Baby!)
User avatar
fastj22
 
Posts: 1594
Joined: Sun Aug 21, 2011 5:56 pm
Location: Mile High

Re: R/C

Postby Bryan Cotton » Sun May 25, 2014 8:24 pm

Crystals - wow. Were any of your planes silk and dope? I at least graduated to Monokote in 1990. I just gave away my '90 Kyosho concept 30 for parts. A guy here still flies one.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5034
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: R/C

Postby fastj22 » Sun May 25, 2014 8:55 pm

Bryan Cotton wrote:Crystals - wow. Were any of your planes silk and dope? I at least graduated to Monokote in 1990. I just gave away my '90 Kyosho concept 30 for parts. A guy here still flies one.

My first chopper was a concept 30. upgraded to a Caliber 30 with a 37 motor in it. I understand its now out of production.

My HiTech transmitter had the fancy frequency module you could chose any of the 72MH freqs. You just had to buy a specific crystal for the receivers. Then check out the freq at the field from the board.

I guess I need to upgrade all that if I come back into the hobby.

John Gillis
SEL Private, Comm Glider, Tow pilot (Pawnee Driver)
Waiex N116YX, Jabiru 3300, Tail dragger,
First flight, 3/16/2013. 403 hours and climbing.
Home: CO15. KOSH x 5
Flying a B-Model Conversion (Super Bee Baby!)
User avatar
fastj22
 
Posts: 1594
Joined: Sun Aug 21, 2011 5:56 pm
Location: Mile High

Re: R/C

Postby Bryan Cotton » Sun May 25, 2014 8:57 pm

Those escapements you may have are out of date too.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5034
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: R/C

Postby radfordc » Mon May 26, 2014 10:46 am

Yeah, my first RC plane used an escapement. Our modern equipment is certainly a wonder.
radfordc
 
Posts: 573
Joined: Fri Jun 03, 2011 9:39 am

Re: R/C

Postby Bryan Cotton » Mon May 26, 2014 10:59 am

My dad had escapements. He built some of his own gear. That technology was way before my time. I could see making a scale model of the Waiex someday. I think they have silver Monokote. I am tempted to kit bash our Sig Kadet kit and make it a Y tail.

My first radio was a couple hundred bucks I think. Was a Christmas gift in the late 70's and was AM gear. When I got back into it my helicopter radio with a gyro was a little less than $200. It was FM. My latest is the new stuff, a little over $100 and has Y tail mixing as one of the default features.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5034
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: R/C

Postby radfordc » Mon May 26, 2014 11:00 am

Here is my new 1/4 scale SPAD XIII.

Image
radfordc
 
Posts: 573
Joined: Fri Jun 03, 2011 9:39 am

Next

Return to Off Topic

Who is online

Users browsing this forum: No registered users and 6 guests