Tool loan program

Questions, recommendations, and all things tool related

Re: Tool loan program

Postby Bryan Cotton » Wed Nov 08, 2017 11:28 pm

I am getting ready to do the canopy. Does anybody have a nice pair of those wood pieces to hold the canopy in the back, mounted to the tooling holes that they would lend me?
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 4954
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Tool loan program

Postby Sonex1517 » Thu Nov 09, 2017 12:18 am

Bryan

You mean for the canopy bows? I may still have them.
Robbie Culver
Sonex 1517
Aero Estates (T25)
First flight 10/10/2015
325+ hours
Jabiru 3300 Gen 4
Prince P Tip
Taildragger
N1517S
User avatar
Sonex1517
 
Posts: 1649
Joined: Fri Jun 03, 2011 10:11 am
Location: Chicagoland

Re: Tool loan program

Postby Bryan Cotton » Thu Nov 09, 2017 8:07 am

No, I mean these wood things:
Image
John S, I stole your pic, hope that is ok.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 4954
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Tool loan program

Postby Gripdana » Thu Nov 09, 2017 11:24 am

I have a set. PM me.
Dana Baker
Scratch Built
First Flight March 8, 2015
Sonex #1534 - N1534S "Aluminum Foil"
Aerovee-Dual Controls-Tail Dragger
Gripdana
 
Posts: 479
Joined: Fri Jan 11, 2013 5:59 pm

Re: Tool loan program

Postby bipbuilder » Sun Feb 04, 2018 2:03 pm

Am building a onex and need a .74 inch reamer. Hate to spend 70 dollars on a new one.any one have a used one to sell or loan.
bipbuilder
 
Posts: 32
Joined: Wed Oct 12, 2016 8:18 pm

Re: Tool loan program

Postby Bryan Cotton » Fri Apr 12, 2019 10:12 am

Hey all,
I got a PM from RCfly46, Joe out in Michigan. He'd like to use my drill bushings. Who has them?
Thanks!
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 4954
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Tool loan program

Postby caveman370 » Tue Dec 03, 2019 6:45 pm

Hi guys,
Putting in a couple oops fittings and was wondering if anyone had a mill down tool to groom the new hole?
Thanks. Mike


Sent from my iPad using Tapatalk
User avatar
caveman370
 
Posts: 69
Joined: Sun Sep 07, 2014 11:12 am

Re: Tool loan program

Postby caveman370 » Wed Dec 04, 2019 1:03 am

Hi guys, I’m putting in a couple of oops fittings and heard there’s a tool to groom the surface of the inside of the tank.
Would anyone know if such a tool is around?
Thanks

Mike
User avatar
caveman370
 
Posts: 69
Joined: Sun Sep 07, 2014 11:12 am

Re: Tool loan program

Postby WesRagle » Wed Dec 04, 2019 2:33 am

caveman370 wrote:Hi guys, I’m putting in a couple of oops fittings and heard there’s a tool to groom the surface of the inside of the tank.
Would anyone know if such a tool is around?
Thanks

Mike


Hi Mike,

David A. is the owner of those tools. Perhaps you could PM him.

Ref. http://sonexbuilders.net/memberlist.php?mode=viewprofile&u=222

Wes
Wes Ragle
Onex #89
Conventional Gear
Long Tips
Hummel 2400 w/Zenith Carb
Prince P Tip 54x50
First Flight 06/23/2020
42.8 Hrs. as of 10/30/21
WesRagle
 
Posts: 838
Joined: Fri Jan 05, 2018 12:35 pm
Location: Weatherford, Tx

Re: Tool loan program

Postby DCASonex » Wed Dec 04, 2019 10:16 am

Those oops fitting tools are out there somewhere. There was a chain of folks wanting to use them and they were to be passed on down. I have lost track of them I hope the person that currently has them or the person before that, reads this and can provide info on their whereabouts.

David A.
DCASonex
 
Posts: 900
Joined: Mon Sep 12, 2011 8:04 pm
Location: Western NY USA

PreviousNext

Return to Tools

Who is online

Users browsing this forum: No registered users and 3 guests