Floor mats

Discuss painting, polishing, or painting vs polishing.

Floor mats

Postby pfhoeycfi » Sat Feb 05, 2022 5:07 pm

I would like to some type of fire resistant mat up front on the floor under my feet...wondering if anyone has found something suitable. Just looking to protect the floor from getting beat up.
Peter Hoey
SEL Pvt, Comm Glider, CFIG, Pawnee & L19 Towpilot
Philadelphia Glider Council
Sonex B SNB0021, N561PH, Taildragger, Aerovee Turbo, MGL MX1, First flight Dec 18, 2022
Also built Sonerai IIL N86PH
pfhoeycfi
 
Posts: 378
Joined: Wed Jun 28, 2017 3:45 pm

Re: Floor mats

Postby Area 51% » Sun Feb 06, 2022 5:50 pm

Not very pretty, but I use 1" (probably only 3/4) high density foil backed foam insulation board. Wears better than you might think and is very light. Originally, I put it down as a noise barrier. Waiting for the Db meter to show up to test that function.
When it starts to get ugly......turn it over. I'm getting about 25hrs a side. Looks like a 4X8 sheet is going to outlast me.
Area 51%
 
Posts: 732
Joined: Thu Feb 18, 2016 7:57 am

Re: Floor mats

Postby pfhoeycfi » Thu Feb 10, 2022 3:12 pm

That's a good idea...cheap & light.

thanks,

peter
Peter Hoey
SEL Pvt, Comm Glider, CFIG, Pawnee & L19 Towpilot
Philadelphia Glider Council
Sonex B SNB0021, N561PH, Taildragger, Aerovee Turbo, MGL MX1, First flight Dec 18, 2022
Also built Sonerai IIL N86PH
pfhoeycfi
 
Posts: 378
Joined: Wed Jun 28, 2017 3:45 pm

Re: Floor mats

Postby XenosN42 » Thu Feb 10, 2022 7:17 pm

I have carpet in my OneX, not fire retardant, however. I’m living on the edge!

It’s greatest benefit to me is that it keeps my heels from sliding when I use the rudder pedals.
-- Michael
OneX N169XE
author of the 'Flight Data Viewer'
XenosN42
 
Posts: 412
Joined: Thu Jul 24, 2014 4:45 pm
Location: PA, USA

Re: Floor mats

Postby Skippydiesel » Wed Aug 16, 2023 7:47 pm

I use a combination of 2 layers of foil backed insulation board, topped with a fire rated marine carpet. All 3 layers glued together for quick removal/clean.

Reason - I am a bit of a "short arse" with in proportion feet - the two layers of insulation get my feet into a better position, relative to the pedals - the carpet is just for improved wear & aesthetics
Skippydiesel
 
Posts: 633
Joined: Tue Jul 06, 2021 6:24 am


Return to Finish methods

Who is online

Users browsing this forum: No registered users and 6 guests