Looking for some CCP-44 rivets

Discussion for builders, pilots, owners, and those interested in building or owning a Sonex.

Looking for some CCP-44 rivets

Postby mikelupo » Fri Jan 05, 2018 6:14 pm

HI All,
We need some CCP-44 Rivets for our Sonex Project.
Rivets ordered last October on Aircraft Spruce are still on back order. Now we're completely out and in need.
Anyone with any left-over CCP-44 rivets? We'll buy em off ya. I guess having to drill out more than a few has caught up to us.

Let me know here...

Thanks in advance,

Mike Lupo
EAA 279
Last edited by mikelupo on Fri Jan 05, 2018 6:31 pm, edited 1 time in total.
mikelupo
 
Posts: 3
Joined: Fri Jan 05, 2018 4:32 pm
Location: Hanson, Massachusetts

Re: Looking for some CCP-42 rivets

Postby gammaxy » Fri Jan 05, 2018 6:28 pm

Have you tried buying from Sonex? They are available in the web store for a good price.
Chris Madsen
Aerovee Sonex N256CM
Flying since September 2014
Build log: http://chrismadsen.org
gammaxy
 
Posts: 593
Joined: Wed Sep 04, 2013 9:31 am

Re: Looking for some CCP-44 rivets

Postby mikelupo » Fri Jan 05, 2018 6:33 pm

Thank you for your reply.
Our Sonex interface person did try, but according to him, Sonex said we'd have to buy a whole rivet kit (i.e. wing kit). Seemed odd because like you mentioned, I found that I can buy them direct on the site. I wonder if they are so scarce that they're getting harder to get stocked?
mikelupo
 
Posts: 3
Joined: Fri Jan 05, 2018 4:32 pm
Location: Hanson, Massachusetts

Re: Looking for some CCP-44 rivets

Postby WaiexN143NM » Fri Jan 05, 2018 6:42 pm

Hi all ,mike,
Ace hardware carries ss rivets in 1/8, 5/32, 3/16 dia in 1/8, 1/4, 1/2 in length. A little more expensive in small batches. Sonex sells rivets in batches of 100, or bulk for sub kits or whole kit.

Good luck !

WaiexN143NM
Michael
WaiexN143NM
 
Posts: 1154
Joined: Mon Sep 15, 2014 1:04 am
Location: SF CA, Tucson AZ, palm springs CA

Re: Looking for some CCP-44 rivets

Postby mikelupo » Fri Jan 05, 2018 7:21 pm

Michael, Thank you for your reply. I'd never think of using Hardware store rivets in my build project, but I guess that's what these CCP's are anyway!

Regards,
Mike
mikelupo
 
Posts: 3
Joined: Fri Jan 05, 2018 4:32 pm
Location: Hanson, Massachusetts

Re: Looking for some CCP-44 rivets

Postby T41pilot » Fri Jan 05, 2018 9:20 pm

Spencer aircraft website shows an alternative part# in stock.

Pop Rivet S/S alt #SSB4-4S
Gregg Kaat
Sonex B #0014
T41pilot
 
Posts: 135
Joined: Sat Nov 26, 2016 3:57 pm
Location: Howard City, Michigan

Re: Looking for some CCP-44 rivets

Postby Fastcapy » Fri Jan 05, 2018 10:38 pm

How many do you need? I think I have a bunch left over I could part with.
Mike Beck
Oshkosh, WI (KOSH)
Sonex #1145 N920MB
Std Gear, Modified Aerovee, Rotec TBI, Dual Stick, Acro Ailerons
MGL Panel
Airworthiness: 10/24/13, First Flight: 05/18/14
Fastcapy
 
Posts: 335
Joined: Sun Jan 12, 2014 11:45 am
Location: KOSH

Re: Looking for some CCP-44 rivets

Postby Bryan Cotton » Fri Jan 05, 2018 11:26 pm

I'd be afraid to use hardware store rivets. Jeremy told me they did a bunch of testing especially when they got a new source of rivets.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 4957
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Looking for some CCP-44 rivets

Postby WaiexN143NM » Sat Jan 06, 2018 2:25 am

Hi all , bryan ,
The rivets im refering to are stainless steel made by Arrow Fastner Co. , saddlebrook , nj. Like alot of things today they are made in china. Iv'e gotten good batches of rivets from sonex , and some not so good, where they tend to break off proud. Yes, checked the gun pressure, and no the holes were not oversized. Gordon mentioned he was building a onex, and the second hand kit he purchased w sonex rivets, tended to break off proud. He ordered new batch from aircraft spruce. That batch he got was good. I 've ordered ss rivets from spruce too. Good luck with those too, but i think could be the luck of the draw no matter where they come from. The small packages from arrow are about $5 for 20. Ive used a few here and there when ran short of a few. Always pulled well and not any broke proud.
Just wanted to clarify , what rivets i was talking about.
I buy 95% of my rivets from sonex. The other 5% are the spruce or arrow rivets.
Have fun riveting!

WaiexN143NM
Michael
Last edited by WaiexN143NM on Sat Jan 06, 2018 11:14 pm, edited 1 time in total.
WaiexN143NM
 
Posts: 1154
Joined: Mon Sep 15, 2014 1:04 am
Location: SF CA, Tucson AZ, palm springs CA

Re: Looking for some CCP-44 rivets

Postby markschaible » Sat Jan 06, 2018 10:47 am

Hello Bryan,

I'm sorry for any confusion that may have come from our shop on this. You absolutely do NOT have to buy a whole rivet kit. We sell blind rivets of all types used in the Sonex in minimum quantities of 100. CCP-44's can be purchased at: http://www.sonexaircraft.com/eshop/cart.php?target=category&category_id=291

Regards,
-Mark
--
Mark Schaible
General Manager
Sonex Aircraft, LLC
phone: 920-231-8297
fax: 920-426-8333
http://www.SonexAircraft.com
http://www.AeroConversions.com

Sales Info: sales@sonexaircraft.com
Orders: orders@sonexaircraft.com
Accounting: accounting@sonexaircraft.com
Tech Support: tech@sonexaircraft.com

Build a Sonex Aircraft in Your School!
Check out the Sonex Education Initiative: http://education.sonexaircraft.com/
markschaible
 
Posts: 119
Joined: Tue Feb 25, 2014 12:01 pm

Next

Return to Sonex

Who is online

Users browsing this forum: No registered users and 3 guests