MGL EFIS XTreme Gen 2 vs Gen 3

Discussion of Avionics and Flight Instruments. Such as: EFIS, EIS, GPS, COM, NAV, Antennas, Audio Panels, Steam Gauges

MGL EFIS XTreme Gen 2 vs Gen 3

Postby austexaviator » Thu Apr 20, 2023 3:47 pm

Does anyone know the difference between these two generations? From what I can tell from the installation manuals it appears MGL dropped support for the RDAC and Airtalk protocols and only supports the can bus protocol. Can someone confirm that? I have an older RDAC and accelerometer/magnetometer and was hoping to upgrade from the monochrome Stratomaster to this. But if I have to upgrade the peripherals it is not nearly as cost effective.

Thoughts welcome.
Patrick
Tailwheel Sonex Model A Jabiru 3300
austexaviator
 
Posts: 47
Joined: Fri Feb 19, 2021 10:01 am
Location: Woodstock, GA

Re: MGL EFIS XTreme Gen 2 vs Gen 3

Postby pilotyoung » Thu Apr 20, 2023 4:48 pm

I suggest you call Adam at Michigan Avionics and ask him
pilotyoung
 
Posts: 185
Joined: Fri Jun 07, 2019 7:31 am

Re: MGL EFIS XTreme Gen 2 vs Gen 3

Postby bvolcko38 » Fri Apr 21, 2023 8:22 am

Bill Volcko XNS0068
Xenos A N68WV 99% flush rivets
Aerovee and Prince P-Tip
MGL Discovery Lite w/ Sandia STX 165R
V6
First hole 4/1/16
First flight 8/24/18
Phase I complete...finally!!!
Also flying a Challenger II since 1999
User avatar
bvolcko38
 
Posts: 261
Joined: Fri Feb 19, 2016 7:40 am


Return to Avionics and Instruments

Who is online

Users browsing this forum: No registered users and 2 guests