SonexBuilders.net

A Forum for Sonex Aircraft Builders and Enthusiasts

Skip to content

LogoLogoLogo
random user submitted photo

Mgl cht settings

Discussion of Avionics and Flight Instruments. Such as: EFIS, EIS, GPS, COM, NAV, Antennas, Audio Panels, Steam Gauges
Post a reply

Mgl cht settings

Postby bipbuilder » Wed Mar 25, 2020 10:15 pm

Have the mgl efis lite. It will only show cht temperature at 32 degrees. Egt reads correctly. Have checked rdac ground to engine block is ok. In the settings I assigned tc5-8 to cht k probes.was wondering what I am missing.
bipbuilder
 
Posts: 32
Joined: Wed Oct 12, 2016 8:18 pm
Top

Re: Mgl cht settings

Postby DCASonex » Thu Mar 26, 2020 8:16 am

Not familiar with MGL, but most CHT probes are type "J" while most EGT probes are type "K" .

David A.
DCASonex
 
Posts: 904
Joined: Mon Sep 12, 2011 8:04 pm
Location: Western NY USA
Top

Re: Mgl cht settings

Postby Bryan Cotton » Thu Mar 26, 2020 8:42 am

My Brauniger uses all type K.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5035
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Mgl cht settings

Postby bvolcko38 » Thu Mar 26, 2020 9:41 am

I also have a Discovery Lite and it works fine. Its been a while, I can't remember where I bought my sensors but I'm sure its just a setting in your efis.
http://www.mglavionics.com/RDAC_XF_INSTALLATION.pdf
Bill Volcko XNS0068
Xenos A N68WV 99% flush rivets
Aerovee and Prince P-Tip
MGL Discovery Lite w/ Sandia STX 165R
V6
First hole 4/1/16
First flight 8/24/18
Phase I complete...finally!!!
Also flying a Challenger II since 1999
User avatar
bvolcko38
 
Posts: 261
Joined: Fri Feb 19, 2016 7:40 am
Top

Post a reply

Return to Avionics and Instruments

Who is online

Users browsing this forum: No registered users and 7 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

SonexBuilders.net is NOT affiliated with Sonex Aircraft LLC. Discussion contents reflect the views of individual participants only. The owner of SonexBuilders.net makes no guarantees about the correctness or the accuracy of ANY of the information on or in any area or page of SonexBuilders.net. Verify ALL information obtained from SonexBuilders.net with the kit designer, equipment manufacturer, or other original official source before using that information. By participating in this website in any form, (including but not limited to reading, viewing, posting, and private messaging) you agree not to hold the owner (AVED LLC), owner members, forum members, or advertisers of SonexBuilders.net legally liable for information found on any of the pages of the website.

SonexBuilders.net is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.