Panel Images

Panel designs, construction methods, and pictures

Re: Panel Images

Postby Darick » Thu Feb 16, 2017 10:41 am

Glenn,Thanks for the heads up. Right now it's velcroed in place.
Bryan, ooo, that pesky engine paint! To be finished...cowl, windscreen, canopy, attach tail and flight controls. Doesn't sound like much buttttt.... :roll:
Last edited by Darick on Thu Feb 16, 2017 10:49 am, edited 1 time in total.
Darick Gundy
Sonex #1646
N417DG
Taildragger, Aerovee, center stick, Prince P-Tip Prop
MGL E1, F2, V6 radio, Sandia Xponder, Reserve lift indicator (AOA), iFly 520
First flight! 10/21/2017
User avatar
Darick
 
Posts: 496
Joined: Mon Aug 05, 2013 9:39 pm
Location: PA

Re: Panel Images

Postby vwglenn » Thu Feb 16, 2017 10:48 am

Also plan to use a pen or a stylus for it. I'm an average dude and trying to manipulate that thing with my fingers makes me feel like King Kong trying to thread a needle.
Glenn
Sonex #600
N889AP
vwglenn
 
Posts: 416
Joined: Mon Sep 15, 2014 1:00 am
Location: 6A2 - South of ATL

Re: Panel Images

Postby WannaFly » Sun Dec 08, 2019 9:31 pm

I'm soooo happy with my very clean panel.. Rights side for my big Ipad. Contaced a label guy on ebay then drew of the lables--$20 for all!!

Panel Pix.jpg
Onex Turbo Aerovee first flight June 3 2019!!
RV6 in progress
Rans S14
Vector 627
100 hours 172
last flew 9/28/2000
WannaFly
 
Posts: 16
Joined: Fri Sep 09, 2016 1:31 am

Re: Panel Images

Postby Bryan Cotton » Wed Apr 28, 2021 11:19 am

Adding my finished panel to this thread:
Image

My compass is mounted on the windshield bow.
Image
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 4954
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Panel Images

Postby BRS » Thu Apr 29, 2021 10:32 am

Here is my (almost) complete panel. All that is missing is ignition and starter switches, as I'm still waiting on the RevMaster to arrive. The goal was to keep it simple and clean. The MX1 controls the v16 radio and the TT22 transponder which are mounted under the seat. The iPad is running FlyQ and shows all the ADSB-in stuff as does the MX1. The ADSB-in comes from a Stratux which is also hardwired to the MX1. The Stratux has 3 antennas, GPS is center glare shield then two 'rubber duckies' on each outside of the glare shield. Picks up traffic easily while still in the hangar.
Engine switches will go below the USB charger and behind the iPad.
The panel is cut from heavy .080 6061 and is in three sections. I can easily remove the center section (5 screws) with the MX1 to gain access to the wiring on both the right and left sides.

Panel-small.jpg
[Be sure to click on the image to see all of it]
-Brock
Sonex-A (s/n 1013)
R2300, P-tip 54/50
Center Stick
V16, TT22
User avatar
BRS
 
Posts: 360
Joined: Thu Aug 20, 2020 4:50 pm

Re: Panel Images

Postby Rofomoto » Thu Apr 29, 2021 5:30 pm

Image[/url]
1735
Longassproject
E-A-G-L-E-S Eagles (next year 16- 0)
Rofomoto
 
Posts: 606
Joined: Sun Aug 06, 2017 2:51 pm

Re: Panel Images

Postby Sonex1517 » Thu Apr 29, 2021 10:30 pm

Here’s my panel and very incomplete interior.

Flightline FL760 radio, GRT Mini, Garmin GTX-327, and a uAvionix Echo under the seats. Upper left is my LRI and a TinyTach so I can see the lift and power in the pattern without looking down.
Attachments
CA6DC175-E1C2-4BAF-9E16-64A3808FF2AA.jpeg
Sonex 1517
Robbie Culver
Sonex 1517
Aero Estates (T25)
First flight 10/10/2015
325+ hours
Jabiru 3300 Gen 4
Prince P Tip
Taildragger
N1517S
User avatar
Sonex1517
 
Posts: 1649
Joined: Fri Jun 03, 2011 10:11 am
Location: Chicagoland

Re: Panel Images

Postby NWade » Sat May 01, 2021 5:02 pm

I just realized I never posted a pic of my completed panel. It came out pretty clean, if I do say so myself!

Now I just need to fix the expensive g*dd%mn air compressor that broke down just as I got into painting my bird, so I can finish her up and get the first flight in this summer!

--Noel
Sonex #1339

sonex1339_panel.png


sonex1339_panel-annotated.png
NWade
 
Posts: 527
Joined: Mon Aug 08, 2011 3:58 pm

Re: Panel Images

Postby BRS » Sat May 01, 2021 9:34 pm

NWade wrote:I just realized I never posted a pic of my completed panel. It came out pretty clean, if I do say so myself!


Do you have a controllable pitch prop or are you using blue for mixture?
-Brock
Sonex-A (s/n 1013)
R2300, P-tip 54/50
Center Stick
V16, TT22
User avatar
BRS
 
Posts: 360
Joined: Thu Aug 20, 2020 4:50 pm

Re: Panel Images

Postby NWade » Sat May 01, 2021 11:12 pm

BRS wrote:
NWade wrote:I just realized I never posted a pic of my completed panel. It came out pretty clean, if I do say so myself!


Do you have a controllable pitch prop or are you using blue for mixture?


Its mixture. Yeah, I know. its the one "non-standard" thing I've really done with the controls; but I got it on sale from ACS and its a nice push-button Vernier control so I can really fine-tune the fuel flow in cruise. And its not like someone's going to jump in the aircraft and _not_ figure out right quick that's the mixture control. :-)

--Noel
NWade
 
Posts: 527
Joined: Mon Aug 08, 2011 3:58 pm

PreviousNext

Return to Panel

Who is online

Users browsing this forum: No registered users and 2 guests