Crossville 2016

Announce and discuss upcoming fly-ins

Crossville 2016

Postby WaiexN143NM » Tue Oct 11, 2016 12:11 pm

Hi all,
Just took a look at the weather forcast , showing rain on sat. Fly safe be safe. Have a great time. Please take photos and if anyone can give us some daily postings on here that would be great.

WaiexN143NM
Michael
WaiexN143NM
 
Posts: 1154
Joined: Mon Sep 15, 2014 1:04 am
Location: SF CA, Tucson AZ, palm springs CA

Re: Crossville 2016

Postby WaiexN143NM » Wed Oct 12, 2016 12:26 pm

Hi all,
Just took another look at crossville weather forcast. Fri showing scattered thunderstorms, sat & sun partly cloudy. Have fun, next year i plan on attending.
Dale, we expect some video of john's crooning!
Fly safe, be safe.
WaiexN143NM
Michael
WaiexN143NM
 
Posts: 1154
Joined: Mon Sep 15, 2014 1:04 am
Location: SF CA, Tucson AZ, palm springs CA

Re: Crossville 2016

Postby Concorde » Wed Oct 12, 2016 6:18 pm

Thursday and Sunday both look good .
Ben
Sonex # 1684
Tri-Gear, Dual Control
Rotax 912uls
N379BS reserved.
Concorde
 
Posts: 176
Joined: Sun Aug 10, 2014 2:11 pm
Location: North Carolina

Re: Crossville 2016

Postby daleandee » Wed Oct 12, 2016 8:23 pm

*
Last edited by daleandee on Sat Jun 24, 2017 12:29 am, edited 1 time in total.
daleandee
 
Posts: 798
Joined: Fri Feb 01, 2013 6:14 pm

Re: Crossville 2016

Postby Area 51% » Thu Oct 13, 2016 6:26 am

So.......does the show go on through Sunday?

I'm traveling to Oshkosh (from the FL Keys) to pick up the last of our required sub-kits, and could (and would love to) stop by and chat if anyone will still be around.

Otherwise, anyone close to I-75 between Miami and Oshkosh ,that wouldn't mind a visit, please give me a shout.

Thanks

Randy 305-394-7789
Area 51%
 
Posts: 717
Joined: Thu Feb 18, 2016 7:57 am

Re: Crossville 2016

Postby Concorde » Mon Oct 17, 2016 4:12 pm

Back from Crossville,weather for the most part was good, and we had a great time.
Special thanks to John Davis and all the people who helped organize such a great event.
Also thanks to all the guys and gals who bought the raffle tickets for the Prince propeller, I will put it to very good use.
Hope to see you all again next year.
Ben
Ben
Sonex # 1684
Tri-Gear, Dual Control
Rotax 912uls
N379BS reserved.
Concorde
 
Posts: 176
Joined: Sun Aug 10, 2014 2:11 pm
Location: North Carolina

Re: Crossville 2016

Postby N111YX » Mon Oct 17, 2016 8:59 pm

I had a great time as well during my short visit on Saturday. That 90 degree crosswind was a challenge!

Thanks again John Davis :D
Kip

2010 Waiex 0082 (first flight May 2010)
Jabiru 3300 #1637 and #3035
Dynon D-180
Becker radios
Garmin GDL 82 ADS-B
1050 hours
48 states visited
Based near Atlanta

Also flying a...
2000 Kolb Firestar II, Rotax 503, 575 hours
N111YX
 
Posts: 705
Joined: Fri Jun 03, 2011 9:43 am
Location: Atlanta, GA USA

Re: Crossville 2016

Postby vwglenn » Tue Oct 18, 2016 11:23 am

I had a great time as well. Thanks for putting together another fun event. This was my second year and the first I was able to fly #600 to join the fun. I wanted to give rides but that wind was, in fact, pretty wicked Saturday. Safety first!
Glenn
Sonex #600
N889AP
vwglenn
 
Posts: 416
Joined: Mon Sep 15, 2014 1:00 am
Location: 6A2 - South of ATL

Re: Crossville 2016

Postby Stogie6 » Tue Oct 18, 2016 3:47 pm

Yes, thanks John to you and all who organize and put this event together for all to enjoy. However, this will be my last time to fly my GMC Yukon XL...I will be in my Onex next year - weather permitting, then it will be the ol' Yukon I guess. To all other Onex builders, let's see if we can make a good showing.
David F. Jones
Memphis (Mud Island), TN
Aerovee powered Onex
N153TD
Based at KAWM and in the midst of Phase 1
User avatar
Stogie6
 
Posts: 132
Joined: Sun Jan 06, 2013 11:36 am

Re: Crossville 2016

Postby Concorde » Mon Dec 26, 2016 7:05 pm

Any pictures ?
Ben
Sonex # 1684
Tri-Gear, Dual Control
Rotax 912uls
N379BS reserved.
Concorde
 
Posts: 176
Joined: Sun Aug 10, 2014 2:11 pm
Location: North Carolina

Next

Return to Fly-Ins

Who is online

Users browsing this forum: No registered users and 2 guests