Work Table

[BobDz]

Time to build a work table.
I was thinking of making the basic table 3' x 8'.
And, if necessary make any needed extensions.

Any suggestions?

[Area 51%]

The EAA work benches are incredibly strong and versatile when built in pairs.

Make any bench you choose with an inch or two overhang for clamping.

[BobDz]

Make any bench you choose with an inch or two overhang for clamping.

Hadn't thought of that!
Thank you!!

[Onex107]

I built my Onex in my half of a two car garage and I didn't want to have a work table left over after the build. I went to a local used furniture store and bought two office desks, like I worked at for 45 years at Caterpillar, for $35 each. End to end they are about 3 X 8 and I could separate them, and stand my drill press in between them when I made the main spar. The legs are adjustable so they can be leveled and the drawers are handy to hold tools. And ---- the best feature was I donated them back to the furniture store when I was through.

[pfhoeycfi]

I built 4 eaa tables and 1 larger table from the flat stock shipping container.

[BobDz]

Thanks everyone for replies and ideas.

I ended up taking a simple route.

After repacking my 4x10 pallet in the order that I will be using the parts and pieces, I simply use the 4x10 OSB pallet for a workbench. As I assemble the fuselage, I'll transfer it to a set of saw horses. "Problem" solved.