random user submitted photo
Oshkosh 2019
3 posts
• Page 1 of 1
Oshkosh 2019
by 984dm » Thu Jul 25, 2019 7:59 am
Hello fellow Sonex builders and flyers,
Got back late last night after driving home after the picnic at Wayne's. Thank you again Wayne and Kathy for hosting such a wonderful event for us!
My Oshkosh experience this year was short, but very productive. Was able to research a few products for my plane project, and buy a few things, but mainly was able to do a lot of "networking" with fellow builders and flyers. A big THANKS to all of you who patiently responded to my long list of questions (I won't try to list all the names as I'd probably miss someone). This information will be very helpful to me as I continue on with my project. Also, the "fellowship" with other Sonex folks was great, and will long be remembered.
For those of you still at OSH, keep enjoying the event, and everyone have safe flights and drives back home!
Dave Misner
Sonex N984DM (work in progress)
Got back late last night after driving home after the picnic at Wayne's. Thank you again Wayne and Kathy for hosting such a wonderful event for us!
My Oshkosh experience this year was short, but very productive. Was able to research a few products for my plane project, and buy a few things, but mainly was able to do a lot of "networking" with fellow builders and flyers. A big THANKS to all of you who patiently responded to my long list of questions (I won't try to list all the names as I'd probably miss someone). This information will be very helpful to me as I continue on with my project. Also, the "fellowship" with other Sonex folks was great, and will long be remembered.
For those of you still at OSH, keep enjoying the event, and everyone have safe flights and drives back home!
Dave Misner
Sonex N984DM (work in progress)
Dave M.
Bloomer, WI
Legacy Sonex N984DM (N number reserved, project is a work in progress)
Tri gear with center stick
Revmaster 2300
MGL XTreme EFIS/EMS, MGL V6, Sandia STX 165
Bloomer, WI
Legacy Sonex N984DM (N number reserved, project is a work in progress)
Tri gear with center stick
Revmaster 2300
MGL XTreme EFIS/EMS, MGL V6, Sandia STX 165
- 984dm
- Posts: 39
- Joined: Wed Jul 25, 2012 6:39 pm
Re: Oshkosh 2019
by Sonex1517 » Thu Jul 25, 2019 8:54 am
Good to see you again Dave!
Robbie Culver
Sonex 1517
Aero Estates (T25)
First flight 10/10/2015
375+ hours
Jabiru 3300 Gen 4
Prince P Tip
Taildragger
N1517S
Sonex 1517
Aero Estates (T25)
First flight 10/10/2015
375+ hours
Jabiru 3300 Gen 4
Prince P Tip
Taildragger
N1517S
-
Sonex1517 - Posts: 1668
- Joined: Fri Jun 03, 2011 10:11 am
- Location: T25 Aero Estates, Frankston, TX
Re: Oshkosh 2019
by Bryan Cotton » Thu Jul 25, 2019 1:30 pm
Hey all, I bought these two signs for $5.25 total for two at the EAA store by the fly mart.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
-
Bryan Cotton - Posts: 5381
- Joined: Mon Jul 01, 2013 9:54 pm
- Location: C77
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 60 guests
