SonexBuilders.net

I share a hangar with two other planes but it sure is nice to be able to haul my Onex home to my heated shop when I have some work I want to do. It is about 12 miles each way and takes about 2 hours round trip on the back road at about 30 mph. Glad I built a trailer for transporting and I can do it by myself if necessary.
Loren
Onex 33

Here's a photo Tony Richardson took in his workshop in Jan 2014. Would that be a warm enough place for you to work?

Just to make the conversion easy, that's 118 F. Might be good training for the afterlife though.

Peter

When it comes to hangar space I think I would rather heat than air condition!

When it is minus 9 C (16 F) I find it uncomfortable to work in the hangar and it is not only comfort but the availability of all my tools, etc. On the other hand I regularly enjoy my sauna at home with the temp at 75 C (170 F)so I will take the heat any day-just sayin.

I use a ceiling mounted infrared radiant tube heater to heat my 24X32 shop, like this
http://www.sunstarheaters.com/product/sir-series/
It's set at 38F when I'm not there. Within a couple minutes of turning it on you can feel the heat, set at 50-55F when I'm working. My Waiex is almost directly under the heater so it warms very quickly. I use 100-150 gal/year propane.
I'm considering a mini split heat pump as well to use mostly in the summer for humidity/cooling in the shop, like this.
http://www.fujitsugeneral.com/us/reside ... index.html
we have one in our home and it works great.