Clocking the turbo
Posted: Sat Sep 17, 2016 3:03 pmHoping to save someone some time. After screwing around for an evening trying to clock the cold side of the turbo with my (too small) retaining ring pliers, I found a solution that works.
https://goo.gl/photos/1PDxhn6iiFZQoPtw5
https://goo.gl/photos/PMe42fm99KvwxpFC9
Basically just use bent angle needle nose pliers. These I picked up at NAPA.
Gregg Short
N715SX -working on firewall forward.
https://goo.gl/photos/1PDxhn6iiFZQoPtw5
https://goo.gl/photos/PMe42fm99KvwxpFC9
Basically just use bent angle needle nose pliers. These I picked up at NAPA.
Gregg Short
N715SX -working on firewall forward.