SonexBuilders.net

A Forum for Sonex Aircraft Builders and Enthusiasts

Skip to content

LogoLogoLogo
random user submitted photo

Flush rivets for tail ribs at the root end

Use this area for aviation related general discussions, newsworthy items, and non model specific topics.
Post a reply

Flush rivets for tail ribs at the root end

Postby Bryan Cotton » Fri Oct 11, 2013 9:03 pm

Hi all,
I dimpled my aft spar channels, but when I went to dimple the mating holes in the aft part of the ribs they were too close to the radius. Looks like I will have to grind one of my dimple dies.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5204
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Flush rivets for tail ribs at the root end

Postby falvarez » Sat Oct 12, 2013 9:59 am

I also had to grind down one of my dimple dies. However, if you don't want to do grind down yours and you have a countersink, you can easily make a custom version of the female side using some scrap 3/16" aluminum.
Frank Alvarez
Sonex #800, Aerovee 2.1
Scratch Building (working on Cowl)
falvarez
 
Posts: 143
Joined: Wed Sep 28, 2011 2:30 pm
Location: Middleburg, FL
Top

Re: Flush rivets for tail ribs at the root end

Postby Bryan Cotton » Sat Oct 12, 2013 6:43 pm

Great idea! :)
Too late! I already ground. :(
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5204
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Post a reply

Return to General Discussion

Who is online

Users browsing this forum: Bing [Bot] and 118 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

SonexBuilders.net is NOT affiliated with Sonex Aircraft LLC. Discussion contents reflect the views of individual participants only. The owner of SonexBuilders.net makes no guarantees about the correctness or the accuracy of ANY of the information on or in any area or page of SonexBuilders.net. Verify ALL information obtained from SonexBuilders.net with the kit designer, equipment manufacturer, or other original official source before using that information. By participating in this website in any form, (including but not limited to reading, viewing, posting, and private messaging) you agree not to hold the owner (AVED LLC), owner members, forum members, or advertisers of SonexBuilders.net legally liable for information found on any of the pages of the website.

SonexBuilders.net is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

cron