SonexBuilders.net

A Forum for Sonex Aircraft Builders and Enthusiasts

Skip to content

LogoLogoLogo
random user submitted photo

Wheel Casting Problem

Use this area for aviation related general discussions, newsworthy items, and non model specific topics.
Post a reply

Wheel Casting Problem

Postby Andy Walker » Wed May 23, 2012 11:33 am

Hey guys. I was starting to put together my wheels, and I noticed some problems on the insides of some of the bolt holes. This is not flash, but looks more like a casting problem that appears as small gaps and seams (not really cracks, but they are inset and look like they could easily become cracks). Anyhow here's the pic:

Image

Is this normal? It doesn't look that way to me; seems it would weaken the bolt passthrough area. Put the question to Sonex a couple of days ago, have not received a response yet...just wondering if anybody else has seen anything like this. It appears in both my main gear wheels (on two holes on one and one on another); my nosewheel is fine.
User avatar
Andy Walker
 
Posts: 375
Joined: Sat Jul 02, 2011 10:27 pm
Top

Re: Wheel Casting Problem

Postby 142YX » Wed May 23, 2012 4:55 pm

Looks to me like poor quality control.. but the entire rim takes the compression load of the bolts, not just the bolt passthrough. I am sure it is strong enough, but it would tick me off to pay a bunch of money for a part that looked that bad.
Waiex # 142 - Taildragger, Jabiru 3300
First Flight - July 13th, 2015
450 hours and counting..
User avatar
142YX
 
Posts: 263
Joined: Thu Sep 01, 2011 10:18 pm
Top

Re: Wheel Casting Problem

Postby Andy Walker » Wed May 23, 2012 5:52 pm

142YX wrote:Looks to me like poor quality control.. but the entire rim takes the compression load of the bolts, not just the bolt passthrough. I am sure it is strong enough, but it would tick me off to pay a bunch of money for a part that looked that bad.


Sonex says it's fine, that this is really just a pass through for bolt alignment and not structural. I agree though...a little on the shoddy side.
User avatar
Andy Walker
 
Posts: 375
Joined: Sat Jul 02, 2011 10:27 pm
Top

Re: Wheel Casting Problem

Postby N111YX » Wed May 23, 2012 11:05 pm

Part of the problem is that Asuza's are "not a bunch of money"... :lol: Cheap! They are marginally adequate for the job.

I would suggest switching over to AN bolts for the wheels. I have seen a broken Azusa bolt on a Sonex wheel. Those really are cheap bolts. AN5-30A's will do it. Install with the head of the bolts in and nuts out of the wheel for a good fit...
Kip

2010 Waiex 0082 (first flight May 2010)
Jabiru 3300 #1637 and #3035
Dynon D-180
Becker radios
Garmin GDL 82 ADS-B
1175 hours
48 states visited
Based near Atlanta

Also flying a...
2000 Kolb Firestar II, Rotax 503, 575 hours
N111YX
 
Posts: 711
Joined: Fri Jun 03, 2011 9:43 am
Location: Atlanta, GA USA
Top

Re: Wheel Casting Problem

Postby Andy Walker » Thu May 24, 2012 9:30 am

N111YX wrote:Part of the problem is that Asuza's are "not a bunch of money"... :lol: Cheap! They are marginally adequate for the job.

I would suggest switching over to AN bolts for the wheels. I have seen a broken Azusa bolt on a Sonex wheel. Those really are cheap bolts. AN5-30A's will do it. Install with the head of the bolts in and nuts out of the wheel for a good fit...


That's a good idea Kip...I didn't realize the bolts were so cheap. Sounds like some cheap insurance.
User avatar
Andy Walker
 
Posts: 375
Joined: Sat Jul 02, 2011 10:27 pm
Top

Post a reply

Return to General Discussion

Who is online

Users browsing this forum: Bing [Bot] and 8 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

SonexBuilders.net is NOT affiliated with Sonex Aircraft LLC. Discussion contents reflect the views of individual participants only. The owner of SonexBuilders.net makes no guarantees about the correctness or the accuracy of ANY of the information on or in any area or page of SonexBuilders.net. Verify ALL information obtained from SonexBuilders.net with the kit designer, equipment manufacturer, or other original official source before using that information. By participating in this website in any form, (including but not limited to reading, viewing, posting, and private messaging) you agree not to hold the owner (AVED LLC), owner members, forum members, or advertisers of SonexBuilders.net legally liable for information found on any of the pages of the website.

SonexBuilders.net is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

cron