New Guy in Australia

New Guy in Australia

Postby DrewPearce » Sat Jan 06, 2024 5:57 pm

Hi,

I'm new to the group, and been researching building a Onex for a while now.
Is there a OneX builder / flyer in Oz here that would let me sit in there creation?
I'm 6'4" tall, and around 250 lbs. Will I fit (I think I can)

There are a few reason for the OneX but a main one is the ability to easily trailer away (I'm only 5 min from the Airport!)
A second is the cheap running an maintenance cost of the AeroVee engine.

I have owned a piper Arrow in the past, and know that the running cost can build up

Hopefully someone can help :)

Thanks

Drew
DrewPearce
 
Posts: 3
Joined: Thu Jan 04, 2024 3:50 pm

Re: New Guy in Australia

Postby peter anson » Sat Jan 06, 2024 9:25 pm

It might help if you narrow down your location a bit. I think there is one at Temora in NSW and a couple in South Australia.

Peter
peter anson
 
Posts: 546
Joined: Thu Jul 31, 2014 2:34 am
Location: Mount Macedon, Australia

Re: New Guy in Australia

Postby Skippydiesel » Sun Jan 07, 2024 12:39 am

There is a Sonex at Wedderburn and another at The Oaks - Sydney Basin.

A whole gaggle in Victoria
Skippydiesel
 
Posts: 633
Joined: Tue Jul 06, 2021 6:24 am

Re: New Guy in Australia

Postby DrewPearce » Mon Jan 08, 2024 7:27 pm

peter anson wrote:I think there is one at Temora in NSW


I'm in the South Sydney area.
Bankstown, Camden, Wedderburn & the Oaks would be "ideal"
But I should get to Temora and see the Museum :)
DrewPearce
 
Posts: 3
Joined: Thu Jan 04, 2024 3:50 pm

Re: New Guy in Australia

Postby DrewPearce » Mon Jan 08, 2024 7:29 pm

Skippydiesel wrote:There is a Sonex at Wedderburn and another at The Oaks


The Sonex would be good for construction advice.
Ill try and track them down.
Both Wedderburn & The Oaks easy to get to
DrewPearce
 
Posts: 3
Joined: Thu Jan 04, 2024 3:50 pm

Re: New Guy in Australia

Postby rizzz » Tue Jan 09, 2024 4:32 am

I’m in Wollongong, I keep my Sonex at YSHL, there are 2 more in my hangar.
Send me a pm if you want to get in touch.
Michael
Sonex #145 from scratch (mostly)
Taildragger, 2.4L VW engine, AeroInjector, Prince 54x48 P-Tip
VH-MND, CofA issued 2nd of November 2015
First flight 7th of November 2015
Phase I Completed, 11th of February 2016
http://www.mykitlog.com/rizzz/
rizzz
 
Posts: 869
Joined: Tue Jun 21, 2011 2:07 am
Location: Wollongong, NSW, Australia


Return to Introductions

Who is online

Users browsing this forum: No registered users and 6 guests