Page 2 of 2

Re: Hello from San Francisco Bay Area!

PostPosted: Tue Oct 04, 2016 12:44 pm
by SP1
Jonathan McGee wrote:I'll jokingly describe it as "looks like it was mauled by a bear" for now. The pallet itself was unmolested, but the boxes on top were all mangled. The tail skins and some u-channel is going to be replaced. I called Sonex CS before signing off on the shipment (Conway) and they told me to accept it, but document the damage and they'll start the claim. Combined with the backordered bits, it's going to take effort to figure out which sub-assemblies I have enough to actually start working on.

It's still a detour from the original post. I was just point out "new Sonex kit in Bay Area."


Jonathan,
KPAO is the closest airport to me. If you need a hand uncrating, just let me know.

Re: Hello from San Francisco Bay Area!

PostPosted: Tue Oct 04, 2016 6:15 pm
by WaiexN143NM
Hi sam,
Taken in context, the c-152 and Pa-38 are trainers. The sonex/waiex are aerobatic and like sports cars. The trainers are like your grandmothers old chevy impala. Sonex aircraft not at all hard to fly, just like many homebuilt aircraft. You can fly them with your fingers. No ham fisted flying needed.
Pick the plane to fit your mission.
Welcome to the forum .
WaiexN143NM
Michael

Re: Hello from San Francisco Bay Area!

PostPosted: Wed Oct 05, 2016 6:41 pm
by tom0nex74
Sam
I am in Novato, Marin County,Gnoss Field (DVO). Built and flying a 0nex and a RV 12. There are also a couple of other builders on the field. Come by anytime, we are always ready to talk Airplane stuff.
Tom Ryan 415 515 4629

Re: Hello from San Francisco Bay Area!

PostPosted: Wed Nov 02, 2016 1:16 am
by kevinh
Hi Sam,

I'm building a Waiex in Belmont (though away till December). I think you will find the building process really fun.

I look forward to meeting you someday. Definitely check out EAA 20 at KSQL - a good group of folks - say hi from me. I used to be really active in the chapter but I've been flaking off ;-).

Kevin

Re: Hello from San Francisco Bay Area!

PostPosted: Thu Nov 03, 2016 12:56 am
by SP1
Tom and Kevin,
Thanks for reaching out to me. Hope to be able to take you up on your offer and meet you guys in person.

Kevin,
Thanks for reminding me about EAA. I'm heading out to EAA 62 tomorrow. They've got an interesting talk going on about electric motors. The technology is almost there...