by Bryan Cotton » Tue Dec 13, 2016 12:15 am
Plumbing progress. Discovered that if you spray WD40 on a paper towel, then wipe the tube with it, it slides like magic through the grommets. Here in the tail I made all the holes in one line.
Here the tube exits the tail and heads for an elbow fitting.
Out the bottom of the elbow and through a guide that keeps it free from the controls.
Then it runs forward:
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23