random user submitted photo
baggage area
2 posts
• Page 1 of 1
baggage area
by bvolcko38 » Thu Sep 08, 2022 7:35 am
What have other builders/owners done to make the baggage area more usable? I'm referring to the rudder cables trisecting the area.
Bill Volcko XNS0068
Xenos A N68WV 99% flush rivets
Aerovee and Prince P-Tip
MGL Discovery Lite w/ Sandia STX 165R
V6
First hole 4/1/16
First flight 8/24/18
Phase I complete...finally!!!
Also flying a Challenger II since 1999
Xenos A N68WV 99% flush rivets
Aerovee and Prince P-Tip
MGL Discovery Lite w/ Sandia STX 165R
V6
First hole 4/1/16
First flight 8/24/18
Phase I complete...finally!!!
Also flying a Challenger II since 1999
-
bvolcko38 - Posts: 261
- Joined: Fri Feb 19, 2016 7:40 am
Re: baggage area
by racaldwell » Thu Sep 08, 2022 9:30 am
Bill,
I used 0.016" 2024T3 sheet to fit out the baggage area. I made 0.025" floor ribs for the bottom to rest on, similar to my RV-6. I also made a hat shelf behind in the next aft bay because I wanted to seal off the aft fuselage from the cockpit. All up with nutplates & screws, this added 5 lbs as compared to nothing.
Rick Caldwell
Xenos 0057 49 hrs
Camit 3300
I used 0.016" 2024T3 sheet to fit out the baggage area. I made 0.025" floor ribs for the bottom to rest on, similar to my RV-6. I also made a hat shelf behind in the next aft bay because I wanted to seal off the aft fuselage from the cockpit. All up with nutplates & screws, this added 5 lbs as compared to nothing.
- Baggage Compartment Primed & Installed Sm.jpg (100.64 KiB) Viewed 3874 times
Rick Caldwell
Xenos 0057 49 hrs
Camit 3300
- racaldwell
- Posts: 399
- Joined: Thu May 22, 2014 4:52 pm
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 3 guests
