Skin folding on Waiex stabilator.

Discussion for builders, pilots, owners, and those interested in building or owning a Waiex.

Skin folding on Waiex stabilator.

Postby BarryHall » Sun Jun 05, 2016 9:56 pm

Anyone have tips for folding over the Waiex stabilator top skin to bottom? Have drilled and cleco'd top skin>
BarryHall
 
Posts: 5
Joined: Mon Dec 21, 2015 8:03 am

Re: Skin folding on Waiex stabilator.

Postby Bryan Cotton » Sun Jun 05, 2016 10:25 pm

Barry,
My recollection was it was clecoed on one side. I flipped it and clecoed to the aft spar first.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 4957
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Skin folding on Waiex stabilator.

Postby N111YX » Mon Jun 06, 2016 1:59 pm

Sounds about right and email sent, Barry.

Bryan Cotton wrote:Barry,
My recollection was it was clecoed on one side. I flipped it and clecoed to the aft spar first.
Kip

2010 Waiex 0082 (first flight May 2010)
Jabiru 3300 #1637 and #3035
Dynon D-180
Becker radios
Garmin GDL 82 ADS-B
1050 hours
48 states visited
Based near Atlanta

Also flying a...
2000 Kolb Firestar II, Rotax 503, 575 hours
N111YX
 
Posts: 705
Joined: Fri Jun 03, 2011 9:43 am
Location: Atlanta, GA USA


Return to Waiex

Who is online

Users browsing this forum: No registered users and 2 guests